Low Energy Consumption Chute Feeder

Chute Feeder, 1.Trough bottom plate do reciprocating movement, 2.High efficiency and producticivity, 3.Easy operation - details see: https://www.machineto.com/low-energy-consumption-chute-feeder-10316304

Condition:New,Used	Capacity(t/h):260	Place of Origin:Henan China (Mainland)	Brand Name:xinxin
Model Number:all	all kinds of colors:as requested	certificate:ISO9001:2000	feeding size:100mm-400mm
handling capacity:10-720t/h	Application:minerals, quarry, building materials, water ,smelting,etc.	motor power:10-30kw	screen mesh size:3mm-100mm
vibrating frequency:750-950r/min	after sale service:for whole service life

contact supplier for Low Energy Consumption Chute Feeder

Chute Feeder Introduction:

Chute feeder an be set up on the ground,also can be hoisted on the mineral warehouse discharge hole. Trough bottom plate do reciprocating movement, Jig frequency of chute feeder is 20-60 times per minute, and the stroke of chute feeder is 20-200mm. Stroke can be adjusted properly by driving device eccentric wheel, and the eccentricity is the half of the stroke. According to production practices of some concentrating plant, as to the viscous minerals, eccentricity should not be less than 30mm.

Chute Feeder :

Tank width of chute feeder is approximately 2-2.5 times of the largest feed particle size.

The largest chute feeder can meet the requirement of feeding mineral that the iron ore size is less than 500mm.

Chute Feeder Technical Parameter:

Model	Discharging Hole(W×H)	Max. Feeding Size(mm)	Bottom Plate reciprocating Frequency(times/Min)	Feeding Capacity (t/h)	Power(kw)	External Size(L×W×H)	Weight(kg)
600×500	600×500	205	38.9	10.5-25.5	4	2750×910×855	1054
980×1240	980×1240	350	23.7	36-90	7.5	3560×1000×1070	1700
1000×1900	1000×1900	300	27	300	7.5	3900×1590×1340	2691