Home  >  Industrial Supplies  >  Air Cleaning Equipment  >  Industrial Dehumidifier

1.Output temp below16C, dew point below-60C, 2.For liquid injection,baking and formation room, 3.Achieve 20~24C,RH below1% - details see: https://www.machineto.com/lithium-battery-dehumidifier-10205644

Application:

Output temperature below16Celsius degree, dew point td below-60 Celsius degree.Be used for liquid injection room, baking room and formation room with special require etc,enable these workshops to achieve 20~24Celsius degree, RH below 1%,also can adjust air temperature and humidity according to the actual requirements.

Principle:

Device is a combined type, which has functions of air filtering, cooling dehumidification, rotor dehumidification, air supply and temperature adjustment, etc.When fresh air go through the filter ,enter into and contact fully with the surface cooler, due to the surface temperature below the air dew point temperature, air cooled,at the same time, the included water turning into condensed water separated out, then the air temperature and humidity decrease, the low temperature and humidity air dehumidified by the first rotor mixing return air of the drying room, and enter into the second rotor for further dehumidification, then we get the dry air, after tempering, sent it to the dry room to meet the technological requirements.

Desiccant rotor is the key part of dehumidifier device, which take high aluminum fiber honeycomb material as the carrier, and the super silica gel or molecular sieve as moisture absorption material. Honeycomb material has huge surface area—more than 3000m²per m³, processing air contact fully with the hygroscopic medium, thereby improving efficiency and hygroscopic depth of the rotor.

Character:

• Consist of the fresh air filter, secondary silicone or molecular sieve rotor, fresh air surface cooler, return air surface cooler, fan, return air filter (tempering section and regeneration parts.
• Regeneration heating by stainless steel tube electric heater or by copper tube aluminum fin steam heater.
• Efficient centrifugal fans, high-strength structural framework, high-pressure foam double-sided enclosure, anti-cold bridge treatment.
• PLC control, electric multi-protection, operation safety, stable and reliable.

Model example:

ZHL-D-7500L

ZHL: Lithium environment dedicated ultra-low humidity dehumidifier code number

D: Regeneration air heating type Z steam heating D electric heating

7500: Processing airflow m³/h

L: Lithium dedicated

Main Parameters of ZHL Series Ultra-low Humidity Dehumidifier

Main Parameters / Model		ZHL-7500
Process Air	Airflow m³/h	7500
	Fan Power kW	7.5
Regeneration Air	Airflow m³/h	1875
	Fan Power kW	1.5
Regeneration Mode	Electrical Heating Power kW	62.4
	Steam Consumption kg/h	105
Drive Motor Power kW		0.24
Attemperation Electrical Heating Power kW		12.0
Outlet Air	Temperature °C	20-25
	Relative Humidity %	≤-60
Supporting System Refrigerating Capacity kW		118.0
Installed Power	Electrical Heating kW	83.64
	Steam Heating kW	21.24
Overall Dimensions	Length mm	5800
	Width mm	1930
	Height mm	3050
Weight kg		3200

Note:

1. Leakage air volume is calculated by 10% of process air volume.
2. The ratio of fresh air is 10% of air output.
3. Output air excess pressure 300Pa
4. Process fan adopt unhoused fan with inverter.