leadshine MA860H stepper driver 2 phase with fans for 57 86 stepper motor

part number MA860H, Brand leadshine, Type : Stepper driver, Phase 2 phase, Description new original - details see: https://www.machineto.com/leadshine-ma860h-stepper-driver-2-phase-with-fans-for-57-86-stepper-motor-10239318
Place of Origin:China (Mainland)Brand Name:leadshineModel Number:MA860HPhase:2
Type:Hybrid   
leadshine MA860H stepper driver 2 phase with fans for 57 86 stepper motor
contact supplier for leadshine MA860H stepper driver 2 phase with fans for 57 86 stepper motor


Description:

Place of Origin:GUA,Guangdong China (Mainland)Brand Name:LeadshineModel Number:MA860H
Motor Type:AC or DCname:leadshineSupply voltage:up to +72VDC or 72V AC
Output current:up to 7.2AGND:Power GroundA+, A-:Motor Phase A
B+, B-:Motor Phase B

Specifications

leadshine MA860H stepper drive
1.High performance, cost-effective
2.Supply voltage up to +72VDC/72V AC

leadshine MA860H stepper drive

leadshine MA860H stepper drive

Features

  • High performance, cost-effective
  • Supply voltage up to +72VDC 72VAC
  • Output current up to 7.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Short-voltage, over-voltage, over-current and short-circuit protection

Introduction

The MA860H is a high performance microstepping Drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the Drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Specifications

Parameters
MA860H
Min
Typical
Max
Unit
Output current
1.8
-
7.2 (5.1 RMS)
A
Supply voltage
+24
+68
+80
VDC/VAC
Logic signal current
7
10
16
mA
Pulse input frequency
0
-
300
KHz
Isolation resistance
500
MΩ

Connector P2 Configuration

Pin Function
Details
VDC
Power supply, 24~80 VDC, Including voltage fluctuation and EMF voltage.
GND
Power Ground.
A+, A-
Motor Phase A
B+, B-
Motor Phase B

leadshine MA860H stepper driver 2 phase with fans for 57 86 stepper motor
Packaging Detail:international packing
Delivery Detail:1-3 days leadtime

Related Product for leadshine MA860H stepper driver 2 phase with fans for 57 86 stepper motor