LEAD-FREE DOUBLE WAVE SOLDERING MACHINE

Best solution to lead-free manufacture - details see: https://www.machineto.com/lead-free-double-wave-soldering-machine-10133907

Condition:New	Place of Origin:Guangdong China (Mainland)	Brand Name:weldsmt	Model Number:W-350DS-LF-C
Arc Current:as below	Pulse Frequency:as below	Pilot Arc Current:as below	Rated Duty Cycle:as below
Motor Type:AC Motor	Dimensions:L3800W1300H1650	Usage:as below	Voltage:380v
Power(W):8kw	Certification:as below	Warranty:as below	After-sales Service Provided:Overseas service center available

contact supplier for LEAD-FREE DOUBLE WAVE SOLDERING MACHINE

1,Windows XP operation software with Chinese and English alternative available, whole machine under integration control can display the failure and save all production data for further analysis.

2,External streamline design and modularized design inside is not only nice-looking but also easy for maintenance.

3,Flux sprayer creates good atomization with low consumption of flux.

4,Turbo-fan exhausting with shielding curtain can prevent atomized flux spreading to the preheating zones and ensure the operation safety.

5,Modularized heaters in preheating convenient for maintenance; Heating under PID control achieves stable temperature and smooth profile, which can solve the difficulty during lead-free process.

6,Soldering pot employing high-strength and distortion-free cast iron produces super thermal efficiency. Wave spouts made of Titanium ensures little thermal distortion and low oxidation.

7,With automatic timing start-up and power-off of whole machine.

7.Specification:

Specifications	W-350DS-LF-C
Dimensions	L3800W1300H1650mm
Weight(Kg)	Approx: 2000Kg
Startup Power	22kw
Run Power	MAX 8kw
Control Method	PC(LENOVO)+ PLC( SIEMENSE)
Power	AC380V 50Hz/60Hz
Spray System
Push type	Air cylinder
Spray Pressure	0.3-0.5MPa
Spray wash	AutoWash
Flux control	0-100ml
Auto fill flux	Auto Fill
Ducting Dimensions	D 200mm
Exhaust	Up Exhaust
Pre-heating System
Preheater Mode	Hot air + IR tube
Preheater Zone number	4 (3Hot air+1 IR)
Preheater lenght	1900mm
Preheater Temperature	25°C~200°C
Warm up time	Approx. 15min
Conveyor System
PCB width	50-350mm
Conveyor Direction	L-R
Conveyor Speed	0-1500mm/min
Conveyor High	750±20mm
PCB High	Top 120mm Bottom 15mm
Speed Control	Frequency
Finger	Titanium fingers V type
Conveyor Angle	4°-7°
Solder Pot System
Solder Wave Driver	Motor Drive
Solder Pot Material	Titanium
Pot Power	12kw
High temperature	350°C
Pot Capacity	300-350Kg
Wave Motor Power	1/2HPx2 3P220VAC
Solder Warm-up time	APPROX: 200min
Cooling System
Cooling Method	Forced air
Finger Cleaning System	Auto
Option
Center Support
Ups protection
Top Pre-heater
N2 System