Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mine Mill

cement mill advanges:, high efficiency and energy saving, lower comsumption, less operation cost, more profits and life long - details see: https://www.machineto.com/international-standard-cement-mill-10314722

Description oncement mill:

cement Mills grinds material by rotating a cylinder with ceramic grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. The rotation is usually between 4 to 20 revolutions per minute, depending upon the diameter of the mill. The larger the diameter, the slower the rotation. If the peripheral speed of the mill is too great, it begins to act like a centrifuge and the balls do not fall back, but stay on the perimeter of the mill. The point where the mill becomes a centrifuge is called the "Critical Speed".

Cement MillApplication:

Cement mill are generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. It is widely used in building material,ceramic raw material, chemical industry, etc,can be used both dry and wet.

Cement MillsFeatures:

1) is an efficient tool for grinding many materials into fine powder.
2) widely used in building material, and chemical industry.
3) can be used both dry and wet.

4) As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
5) The longer the ceramic mill runs, the finer the powder will be.
6) Our ceramic mill have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals.

Cement millsWorking Principle:

The cement mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of ceramic ball in the chamber. The centrifugal force caused by rotation of barrel brings the ceramic ball to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.

Technical parameters ofCement mill series

Specific-ation(m)	Milling form	Transmission form	Gear box		Motor power(kw)	Capacity(t/h)	Weight(t)
			Type	Speed reduction ratio
Ø1.83*7	Open flow	Brim	ZD60	4.5	245	6.5-8	36
Ø2.2*7.5	Circle flow	Brim	ZD70	5	380	8-10	56
Ø2.2*11	Open flow	Central shaft	D110	35.5	630	12-13	104.6
Ø2.2*13	Open flow	Central shaft	D110	35.5	630	16-18	114
Ø2.4*13	Open flow	Central shaft	D110	35.5	800	20-23	171.5
Ø2.6*13	Open flow	Central shaft	MFY100	19.5	1000	28-32	149.7
Ø3*9	Circle flow	Brim	D125	41.2	1000	28-36.5	136.4
Ø3*11	Circle flow	Central shaft	D140	42.8	1250	36-47	180
Ø3.2*13	Open flow	Central shaft	D140	36.5	1600	45-50	198
Ø3.8*13	Open flow	Central shaft	MFY250	16.5	2500	60-62	204
Ø4.2*13	Open flow	Central shaft	JQS3550	15.6	3530	85-87	254

Technical parameters ofRaw material mill series:

Specification(m)	Milling	Transmission form	Gear box		Motor power(kw)	Capacity(t/h)	Wei-ght(t)
			Type	Speed reduc-tion ratio
Ø1.5*5.7	Open flow	Brim	ZD40	3.55	130	4.5-6	24.7
Ø1.83*6.4	Open flow	Brim	ZD60	4.5	210	7.5-15	34
Ø2.2*6.5	Circle flow	Brim	ZD70	5	380	14-26	52.8
Ø2.2*13	Open flow	Central shaft	D110	35.5	630	29-34	118.5
Ø2.4*6	Circle flow	Brim	2HD-700-10IIJ	5.35	380	15-38	68
Ø2.4*10	Circle flow	Brim	2D80-4-II	6.435	570	25-45	95.8
Ø2.4*13	Open flow	Central shaft	D110	35.5	800	40-50	171.5
Ø2.6*13	Open flow	Central shaft	MFY100	19.5	1000	43-54	149.7
Ø3*9	Circle flow	Central shaft	D125	41.2	1000	32-68	136.4
Ø3.2*9	Circle flow	Brim	MBY900	7.1	1250	62-65	184.5
Ø3.8*7.5	Circle flow	Brim	JDX900	5.6	1600	80	233
Ø4.6*10+3.5	Circle flow	Central shaft	JQS3550	15.1	3550	190	358
Ø4.6*10.5+3.5	Circle flow	Central shaft	JQS3550	15.1	3550	210	360