industrial water cooling tower

industrial water cooling tower, A. No Pollution & Scale Formation, B. Anticorrosion & Anti-wind, C. Indoor and Outdoor - details see: https://www.machineto.com/industrial-water-cooling-tower-10241273

Condition:New	Cooling Type:Counter Flow	Material:Metal	Place of Origin:Shandong China (Mainland)
Brand Name:Heng An Closed Cooling Tower	Model Number:Closed cooling tower	Voltage:110-415v etc	Power(W):As Model Closed Type Water Cooling Tower
Dimension(LWH):As Model Closed Type Water Cooling Tower	Weight:As Model Industrial Closed Circuit Water Cooling Tower	Certification:CTI,CTI,ISO,BV,CCS,etc	Warranty:12 month
After-sales Service Provided:Overseas service center available	industrial water cooling tower:Heng An Water Cooling Tower	Cooling coil material:stainless steel/Hot-Dip Al-Zn Alloy-Coated Steel Sheet etc	Nozzle material:ABS
Design Center:National Heat Exchange Center(in Shandong University)	Water flowing rate:0.001%	Anti-corrosion way:The overall heat invasion zinc	Noise Control:Low speed fan,noise damping
Maintenance:with access door and ladder	Water pump motor:protection class IP54,insulation class F

1.Refrigeration & Heat Exchange Equipment Cooling Tower

Weifang Heng An Imp&Exp Co., Ltd
Parent Company: Weifang Heng An Radiator Group Co., Ltd (Founded in 1975)
China Top Refrigeration & Heat Exchange Equipment Manufacturer
For Cooling Tower, Evaporative Condenser, Radiator!

Our Factory supply Stainless Steel Closed Water Cooling Tower(BHX Combined-flow Cooling Tower and BNX Counterflow Cooling Tower),FRP Cooling Tower(Square Cooling Tower and Round Cooling Tower) and Some Cooling Tower Parts

2. Stainless Steel Closed Cooling Tower

1 Closed Cooling Tower

Main Material:Stainless Steel, Copper Tube Cooling Tower etc

BHX combined-flow,BNX counterflow Series closed cooling tower is one of the most efficient industrial Refrigeration & Heat Exchange Equipment.

Compare with open cooling tower +heater exchange combination	More nearly to the air wet buld temperature, reduce scale, improve working efficiency.
Compare with air-cooling system	The processing temperature reduce more 10-20°C,more smaller working place,save energy
Compare with open cooling tower	No pollution can reduce scale, make sure the standard working performance.
Compare with single-use water system	Reduce the bad influence for the environment, save more than 95% cooling water.
Compare other cooling system	Save installment cost ,save sapce

A. No Pollution & Scale Formation

The water/air is in a closed pipe. It won't be polluted. So water/air won't make scale formation in your equipment. It won't hurt equipment (e.g. furnace).

B. Anticorrosion & Anti-wind

All parts are hot-dip galvanizing. And we use the best material for pipe, shell and all parts.

Special design grille for Anti-wind

C. Indoor and Outdoor

The closed cooling tower can be setup indoor, nearby the machine.

4. Closed Cooling Tower Project Examples

Our products are mainly used for: Our products are mainly used for:

1.cooling the induction furnace of steel plant and jobbing foundries, cooling rolling machine, cooling the quenching tank, cooling the continuous casting.

2.cooling the hydraulic oil, electroplating solution, quenching oil, circulating water production line and other cooling industrial fluid;

3.cooling the water source heat pump system, computer room air conditioning system, auxiliary cooling system and other cooling air conditioning systems .

4.cooling the air compressor water jacket, injection mold, transformers, engine water jacket and other cooling industrial facilities.

5.cooling other equipments, such as power plants, paper mills, food factories

5. FRP Cooling Tower

A Square Cooling Tower

B Round Cooling Tower

I.Features

The most outstanding feature of this type cooling tower is energy saving and low noise.The noise is 5dB(A) lower than traditional low noise cooling tower. It is widely applied in places with higher requirement in noise control,such as hotels,hospitals,public buildings and residential area vicinities.

II. Main parts

Decelerating device

Terylene fiber reinforced Neoprene belt, thermal stability, high efficiency, no extension in water, no slipping, low noise.

Electric motor

Especially designed for energy-efficient and low-noise cooling tower, water proof, thermal stability, high efficient and low noise.

Fan

Impeller made by FRP or aluminum alloy,with low noise, high efficiency and blade angles adjustable.

Noise absorption measure

In the ultra-low noise cooling tower, there are shield with noise-absorbing material and noise-absorbing grilles on the air outlet of the upper shell of the tower, which reducing the noise from fan and electric motor.Water distribution system

Stationary spraying allows equal water distribution. Low tap reduces fault rate of the water distribution system.

Fill

Reformative S wave PVC increases the water redistribution ability, heating performance and reduces the relative resistance. This material can stand temperature as high as 70°C, low as -50°C. Good performance in fire resistance

Air inlet louver

The FRP louver reduces water splashing and air resistance.

7.Heng An Radiator Group

Heng An Radiator Group, established in 1975, specializing in research and production of water, oil and air cooling systems, is one of the top radiator bases in China. More than 900 employees now.

Our engineer can design the cooling tower based on client situation.

Chemical industry cooling tower

Heat treatment cooling tower

Metallurgical Industry cooling tower

Center Air-condition Cooling tower

Gas industry cooling tower

Oil industry cooling tower

Pharmaceuticals industry cooling tower

Coal Chemical Industry cooling tower

Emulsion cooling tower

Our engineer will go to client country to install cooling tower according client requirment.

5. Contact Us