Industrial Tube Ice Machine (1tons to 70tons)

Tube ice machine FIT-100

Focusun tube ice machine features:

1. Use hot Freon gas to make ice fall off fast with the whole process takes only 150~180 seconds.

2.After the ice is off, the water of low temperature is used for ice-making, saving energy consumption and increasing the volume of production of ice.

3.With the unique water distributive pan and air mouth, the water can evenly flow on the tube wall of the evaporator spirally, so it improves the efficiency of heat transfer.

4.The use of stainless steel SUS304,aluminum alloy plate-type evaporator, accords with the health and safety requirements.

5.The use of air pressure control excludes the risk of rupture of the evaporator tube and the tube ice diameter can be adjusted according to customers' needs.

6.Half-full liquid: liquid level controller which manages liquid supply of refrigerant makes the system more stable.

Tube ice introdution:

Tube iceis a kind of hollow cylindrical ice with external diameter ø22,ø29,ø35mm and length 25~42mm. The hole diameter is usually ø5~10mm and it can be adjusted according to ice making time. It has good air permeability and long storage life. Directly formed by freezing clean fresh water, has the features of tasteless , sanitary, transparent and completely conforms to food standards. It can be directly eaten or used to freeze drinks, mix wines, cool foodstuffs, make ice pastries and keep fresh, etc.

Application fields of Tube ice machine

1. Freezing drinks, mix wines. cool foodstuffs, make ice pastries and keep fresh.

2. Widely used in hotel, bar, KTV, restaurant, catering, supemarket, ballroom, etc.

3. Food production process.

4. Cold accumulation.

5. Chemical industry process, etc.

6. direct eating

7. Fish industry

8. Special fields

FIT-100 ice tube maker main specification:

Capacity:10ton/day

Power supply:380V/3P/50Hz, 220V/3P/60Hz , can be customized according to your requirements.

Refrigerant: R22 or R404A system

Compressor: Bitzer compressr, 50Hp x 2

Solenoid valve: Denmark Danfoss

PLC controller: Siemens PLC CONTROLLER, customized

Size of tube ice maker machine(L X W X H mm ): Unit:1800×1500×1600

Evaporator: Evaporator:1180×1180×3500

Size of cooling tower Φ2000×2410 (O.D.×H)(mm)

Installation power: 45kw

Standard condition: Dry ball temperature is 35C, and inlet water temperatuer is 20C. The machine get full capacity.