Industrial Model Dehumidifier

Industrial Model Dehumidifier, LED Digital Display Micro-computer Control - details see: https://www.machineto.com/industrial-model-dehumidifier-10205768
Place of Origin:Zhejiang China (Mainland)Brand Name:mingtengModel Number:DH-1382Bmodel:industrial model
Industrial Model Dehumidifier
contact supplier for Industrial Model Dehumidifier


Industrial Model Dehumidifier

Voltage/cyclePower Input(w)CompressorDimension (mm)Weight(KG)
220V/50Hz2000Rotary710*575*117578

Applied area: 2.6-3m Height 140-160m2.

1.Front air inlet, left side air outlet.

2.Defrosting function will automatically start when the ambient temp is below 18°C.

3.Digital display makes humidity control more freely.

4.Four casters make the machine move freely.

5.LED Digital Display Micro-computer Control.

6.138L/D.

7.price is pending.

Special Suggestion

1.The humidity sensor of micro-computer controlled dehumidifier is a precision instrument. It may fail to work if it is put in a circumstance filling with corroded gas or with dust. (Humidity sensor has half-a-year warranty.)

2.Please read the Service Manual carefully before using the machine. Do not press the button without care, or the components may be damaged.

3.This machine is not explosion-proof, so please don't use it in a circumstance filling with gas, dust, chemical and biologics which are flammable or explosive.

4.Power supply should be 220V/50Hz AC with ground connection and relay (except DH-1602B 380V/50Hz). Power cord should match the machine's power input. Fuse's power rating should be set according to the service manual.

5.Stop the machine for a while after working long hours, and carry out maintenance periodically.

Prohibition

1.Do not use power cord connector as the switch. Turn off the switch after using.

2.Do not block the air outlet and air inlet with stuff, in avoid of damage and accident.

3.Do not insert finger or stick into the air outlet.

4.Do not expose the machine in sunshine or outdoors.

5.Do not unauthorized reconstruction or else we are not responsible for the machine's damage or any accident that may occur.

When Failure Occurs

1.Pull off the power plug at once.

2.Eliminate malfunction according to the operation instruction.

3.If you can not resolve the problem, Please contact the local dealer(s) or the manufacturer directly.

4.If it is damaged during transportation, please contact local dealer(s).

Notice

1.Put the machine on the flat and hardened floor, avoiding noises caused by shaking.

2.Use the special power supply and its voltage should match the machine. Do not share the socket with other appliance.

3.Do not put the machine near the heating source, to avoid consume exceeding energy or cause any accident.

4.Do not use in the ambient temperature that is higher than 38°C.

5.When move the machine , do not slant it over an angle of 45°.

6.The dehumidifier will frost or freeze if it is used under low temperature(below 18°C). Machine with auto-defrost function will defrost automatically; if without, please defrost manually (cut the electricity). If unnecessary, preferable not use it under low temperature.

7.Keep at least 50cm-100cm from surrounding things when the machine is working.

8.Pay attention to the installation of outside hose when use the function of continuous drainage.

9.Thismachine is different from air-conditioner. The temperature may increase a bit when it is used in a small room.

10.When the machine is used under low humidity and low temperature (ambient temperature<10°C, humidity<45%), dehumidifying capacity may obviously reduce, even have no effect.

Industrial Model Dehumidifier
Packaging Detail:packed by carton
Delivery Detail:35-45days

Related Product for Industrial Model Dehumidifier