Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Cutting and Forming Tools  >  Turning Tool

1. Standard or customized, 2. K10-30, P10-30 Any grade with different size are available, 3. High precision, 4. superior quality - details see: https://www.machineto.com/indexable-cemented-carbide-inserts-cutting-tools-10150618

Long life,Good Wear Resistance,Excellent toughness,any grade with different grain size are available

We specialize in the manufacture of tungsten carbide products such as tungsten carbide strips, rods,rings,inserts, shims,, wear parts, drawing dies,drilling bits,cold forging dies,bars, ,balls,burrs ,PCD blades,PCBN blades,ceramic inserts, and customized products etc.In the meantime ,please be informrd any grade and performance are available as per customers requirements and our annual output is around 500 tons .

The carbide powders are WC, TiC, Cr3C2, VC, TaC, NbC, BC4, etc

Grade	ISO Code	Density g/cm3	Hardness HRA	TRS N/mm2	Performance & application recommended
SK6	K10	14.7-15.1	90-90.5	1850-2000	With better wear resistance than SK8 alloy, used for semi-finishing and finishing cast iron, non-ferrous metal and its alloy, and cutting machining non-metallic materials.
SK6A	K10	14.7-15.1	91.5-92	1750-1850	Fine grain alloy, with high wear resistance, used for semi-finishing hard cast iron, non-ferrous metal and its alloy, semi-finishing and finishing high manganese steel, etc.
SK6X	K10	14.7-15.1	91.5-92	1800-1950	Fine grain alloy, used for machining chilled cast iron and heat resistant steel, also used for finishing plain cast iron.
SK8	K20	14.5-14.9	89-89.5	2000-2300	With high strength of use, used for rough machining cast iron, non-ferrous metal, non-metallic materials, uneven surface and discontinuous cutting.
YS2T	K20-M30	14.4-14.6	91.5-92	2200-2400	Fine grain alloy, used for processing heat-resistant alloy, high manganese steel materials, etc.
ST5	P30	12.5-13	90-90.5	1800-2200	Used for rough machining carbon steel and alloy steel.
ST14	P20	11.2-12	90.5-91	1400-1600	Used for rough machining and semi-finishing carbon steel and alloy steel.
ST15	P10	11-11.5	91-91.5	1400-1600	Used for semi-finishing and finishing of continuous cutting carbon steel and alloy steel.
SW1	M10	12.6-13.5	91.5-92	1400-1600	Used for processing difficult-to-machine steels, such as cast iron, plain steel and heat resistant steel, stainless steel and so on.
SW2	M20	12.4-13.5	90.5-91	1600-1800	Used for processing special difficult-to-machine steels, also used for processing plain steel and cast iron.