Impact Bar used in the loading area of the belt conveyor

Impact Bar:, 1. Combining rubber to UHMW polythene, 2. Shock absorbing, 3. Size: Length 1220mm, 1400mm, 1524mm, 1600mm, 1800mm - details see: https://www.machineto.com/impact-bar-used-in-the-loading-area-of-the-belt-conveyor-10203902

Place of Origin:Zhejiang China (Mainland)

Brand Name:Gold-Camel

Model Number:Length 1220mm, 1400mm, 1524mm, 1600mm, 1800mm,

Color:Blue/Black, White/Black, Yellow/Black

Impact Bar used in the loading area of the belt conveyor:

Impact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. It’s designed to absorb impact loading which will dramatically reduce shock and stress loading to the structure.

Features
1. Avoids the damage to the belt through the contact between the bar and surface of belt.
2. The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material caused by inequality of the stress on the belt.
3. The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum.
4. Ultra elastic rubber absorbs the impact in the maximum.
5. Each part of the impact bar is closely jointed by hot vulcanization.
6.“T-track” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.

Technical Data

Color of UHMWPE	Blue/White
Tensile strength	(Mpa)	30
Elongation at break	(%)	300
Hardness	(Shore A)	95-98
Density	(g/cm³)	0.93-0.94
Coefficient of friction		0.07
Color of rubber	Black
Tensile strength	(Mpa)	19
Elongation at break	(%)	400