Hydraulic Membrane Filter Presses for Clay and Ceramic Powders
Place of Origin:Henan China (Mainland) | Brand Name:SHUANGFA | Model Number:SF,800/1000/1500 or as required | product name:hydraulic membrane filter press |
Material:carbon steel |
Hydraulic Membrane Filter Pressfor Clay and Ceramic Powders
Those productions are widely applied in petroleum, chemical, metallurgy, environmental protection, food, beverage, pharmaceutical, sugar, starch, paper, coalwashing, ceramics, mineral processing and various sewage treatment industries’ separation the solid-liquid.
Components:
It consists of frame, filter plate,filter cloth,control conbinet, hydraulic station.
Advantages ofHydraulic Membrane Filter Press:
- Increased product throughput
- Reduction of the residual moisture of the filter cake
- Shorter filtration, wash and cake cycles
- Cake air blasting can be omitted
- Drier cakes means energy saving on cake drying and transportation
- The optimized cake structure facilities quicker and better washing results
- Varying product quantities and compositions present no problems to the membrane filter press
- High degree of automation, labor-saving and ease to operate:adopting PLC control system, including automatic keeping pressure, automatic pulling board, quick program functions,ect.
Hydraulic Membrane Filter Press designs meet simple standards:
1Low opterating cost
2Trouble free operation
3Sustained operating ability
Applications ofHydraulic Membrane Filter Press:
· Commodity and Specialty Chemicals
· Pharmaceutical Raw Materials and Intermediates
· Food Products and Ingredients
· Clay and Ceramic Powders
Dyes and Pigment
· Industrial Waste Dewatering and Recycling
· Oil industry
Product components ofHydraulic Membrane Filter Press:
Resist-bending main bean:main beam with H-van structure is rigid and anti-bending, which completely solves the main beam bending problem.
hydraulic membrane filter pressstructure and working principles
Configuration and operating principles
1.Filter press consists of frame,filter plate,pressing system(manual,mechanical or hydraulic) and electric control cabinet.
2.Frame consists of base,push plate,tail plate and girder,and supports the pressing device and filter plates.
3.Filter plates are installed on girder between tail plate and push plate,with filter cloth sandwiched in them.
4.In operation,the pressing device(cylinder piston rod or screw) drives the push plate to press the filter plates and filter cloth between push plate and tail plate,filter chambers are formed between pressed filter plates and material get into the filter chambers through the feeding port in tail plate. Solid particles are trapped in filter chambers form into cakes,washing water can be introduced through the washing port in the tail plate. In similar manner,to drying the press cakes,compressed air can be introduced through the washing port.
5.Plate and frame type filter-press is the same as recessed plate filter press in structure,except the filtering part that consists of one plate,one frame and filter cloth,with filter chambers between plate and frame.
6.Liquid stream of filter press can be divided into external stream and internal stream,external stream refers to that the filtrate is discharged directly from the outlet port of filter;internal stream refers to that the filtrate from various filter plate is collected before being discharged out of the filtrate port.
Filter cloth,material and performance data of hydraulic membrane filter press
Performance | Dacron | Nylon | Polypropylene fiber | Polyvinyl fiber |
Acid resistance | Strong | Unsatisfactory | Good | Poor |
Alkali resistance | Weak alkali resistance | Good | Excellent | Excellent |
Heat resistance | 150°C | 120°C | 70°C | 80°C |
How to order hydraulic membrane filter press
Select the model,plate and frame materials,pressing mode and filtering form by considering the filter press introduction and parameters.
According to your products need,you can select open stream,washable or non-washable. All of your products need,you can select open stream,hidden stream,washable or non-washable. All of that specified the conditions in the contract.
The unit is provided without pump,to order the unit complete pumps is stated it in the contract.
Our company can make non-standard model to meet your special demands.
The actual parameters at the time of order shall prevail owing to model improvements.
If you are interested in ourhydraulic membrane filter press
Please contact cathy freely.
Packaging Detail:wooden cases |
Delivery Detail:15-30 days after receipt of the prepayment |