Home  >  Raw Material Processing Machinery  >  Rubber Product Making Machinery

hydraulic crimping machine:, 1.We are manufacturer., 2.Favorable price and quick delivery., 3.Excellent quality. - details see: https://www.machineto.com/hydraulic-hose-crimping-machine-10339148

Product Description

Model JSSG-51- III pipe locking machine is mainly used for locking processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for locking the two-way bends, especially large bends and irregular shape bends. This machine features small and portable appearance, big force, low noise and easy to operate. The bucking amount can be precise adjusted through a scale. It makes the mould base division to be more even through the double inclined to be more even through the double inclined plane tight-flap mould seat equipped with a high accuracy guiding device.

SPECIFICATIONS:

	JSSG-51-1 Rubber Tube Locking and Pressing Machine	JSSG-51-2 Rubber Tube Locking and Pressing Machine (With a hose skinned bodies)	JSSG-51-3 Rubber Tube Locking and Pressing Machine
Voltage	380V/220V	380V/220V	380V/220V
Deduction pressure	280T	280T	280T
Pressure System	25MPaAdjustable	25MPaAdjustable	25MPaAdjustable
Dimension	1200(From top to bottom)*460(Before and after)*840(left and right)mm	1200(From top to bottom)*460(Before and after)*840(left and right)mm	740(From top to bottom)*450(Before and after)*650(left and right)mm, A high degree of work 550mm(From the bottom)
Die	17-63 (diameter) of a total of 10	17-63 (diameter) of a total of 10	17-63 (diameter) of a total of 10
Range of Withholding	17-63	17-63	17-63
Electrical power	4.0KW/3.0KW	4.0KW/3.0KW	4.0KW/3.0KW
Hydraulic Pump	CBW-314Gear Pump/10YCY14-1BQuantitative Piston Pump	CBW-314Gear Pump/10YCY14-1BQuantitative Piston Pump	CBW-314Gear Pump/10YCY14-1BQuantitative Piston Pump
Fuel tank capacity	120L	120L	70L
Motor-driven peeling agencies Mandrel number	---	6-38 of a total of 10

Warranty of hydralic hose crimper/hose crimping machine

The machine failures are warranted to repair in 3 months for the electric from the purchased date, and 1 year for the body of the machine.

The Operation of hose crimping machine
Operation:

Based on the size of the rubber hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base. Regulated well the scale position as per the data in the data in the table, the pipe locking can be done.

After pipe locking, use a vernier caliper to measure the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same.

These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.

Notice:

1. When buckling, make the joint to locate the mould center as much as Possible, the joint is not buckled on the hex nut.
2. Prevent tool and other foreign matter from entering the locking head.
3. After the work is finished for each time, the eight-block mould base Must be made to extend to the greatest extent, this can make the Spring to be at extension status. If not, the spring will be damage.
4. When working, the hand should not stretch into the locking head.
5. The power supply must be switched off when maintenance is done.

We have many different types of hose crimping machine, ranged from 4mm to 153mm! For any further information, you can contact me at any time.

features
1 lock parts made strict production process, the selection of appropriate treatment, superior performance, with strong fatigue life.
2 Two hydraulic pumps used Hefei long source high performance gear pumps, high efficiency and durability.
3 hydraulic valves used in northern Taiwan and Hong Kong Seiki products, versatility and high accuracy.
4 piston surface hardness, long-term use is not easy to scratch.
5 Return speed, improve work efficiency.
6 large opening for elbow hose crimping class
7 automatic operation and manual operation with two control modes.
8 with a variety of structural forms to choose from, customers can choose the desired mode of operation type .

Uses
Hydraulic hose crimping machine is the shipbuilding industry, oil drilling, heavy industry, as well as an indispensable withhold large mining equipment, according to the product specification models can not withhold a variety of high and low pressure hose, oil hose
Technical Parameter: