Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Hoists

1.CE & ISO9001, insured by PICC, 2.Capacity: 0.5Ton-20Ton, 3.Lifting height: 2.5-3m, 4.manufacturer - details see: https://www.machineto.com/hs-c-series-chain-block-10097147

China made HS-C Chain Block

Zhongtian Crane & Hoist Machinery Co., Ltdsince founded till now,we always concern on the lifting machinery and equipment,we have been in this line for many years and very professional on the electric hoist and the chain blocks,and hoist with trolley and so on, all our products are well sold in many countries' market!

Characteristic

It is widely used manual hoisting machinary which is easy to use and carry .It can be used in factory ,mine ,agricuture ,electricity,construction site , wharf and dock.And it can also be used in installing of machinery ,lifting ,loading and unloading in the warehouse ,especially suitable to be used in the open air and the place without power souce.

The main feature as follows

1.we manufacture the products in accordance with national standard ,use the symmetry arrayed two-stage gear driven structure.

2.design reasonable ,advanced structure ,beautiful apperance ,small volume, light weight, safety,durability.

3.It needs less hand-full force,high efficience and easy maintance.

Detailed Specification

Perfect for lifting objects.

Mechanical brake provides positive load control when lifting or spotting.

Durable hardened steel construction.

Little chain pull is required to lift the heaviest of objects.

2-Year Warranty.

Zhongtian high-tech load chains are approved by CE and GS,

Reliable planetary gears.

Safe and rugged.

The chain weighs only 0.25 kg per meter. It keeps the hoist still light even with extended lift chain.

Case in use

1. The load chain must always mesh correctly with the load sheave. With multi fall chain blocks twists can arise by turning over the bottom hook through the load chain.

2. Regularly lubricate the whole length of the load chain with machine or gear oil but be careful not to over lubricate as oil or grease on the brake discs can cause the brake to malfunction and slip.

3. Confirm that the brake is functioning properly by hoisting the load 100mm and check the brake when lowering the load.

4. Non-vertical (sideways pulling) of the hand chain is not recommended on our chain blocks.

5. The hand chain is equipped with a safety link. When the safety link opens or deforms, stop at once and inspect for the cause.

6. Confirm that the monorail beam or structure supporting the chain block is of sufficient strength to support the load to be lifted.

7. Never lift loads in excess of the WLL of the chain block.

8. Never walk or work under a hoisted load and never lift, support or transport people.

9. Use chain blocks manually only.

10. Do not permit more than one operator to pull on the hand chain at one time.

11. Lift loads correctly with proper slings and attachments. Never lift with the point of the hook and never use the load chain as a sling by back hooking.

12. Lifting a load with two chain blocks is not recommended. If the operation is unavoidable, hoist the load with utmost care, keeping the load balanced.

13. Never run the load chain out too far. When operated beyond the range of lift, an excessive load that can cause damage will be imposed on the chain block.

14. Chain blocks are designed for lifting loads vertically and should not be used for horizontal or angle hoisting.

15. Extreme temperatures will reduce the durability of the hoist. Loads should be hoisted or lowered very slowly and carefully in extreme temperatures.

16. Never leave a load hanging on the hoist.

17. Never use the chain or hook as a ground for welding.

Product Details

Product Packing

Certification

!! Best Quality and Best After-service.

Any questions could contact me ,we will reply you within 24 hours.