Home  >  Industrial Supplies  >  Air Cleaning Equipment  >  Industrial Dehumidifier

1. Industrial dehumidifier,rotor /wheel dehumidifier, 2. Dehumidity capacity: 4.6~216kg/hr, 3. Air flow:500~20000m3/h - details see: https://www.machineto.com/housewell-reasonable-dehumidifier-price-with-ce-certificate-10205835

4.Proflute Rotor wheel, imported from Sweden

5.Economical, energy-saving, and easy operation

6.Error locator system

7.Washable air filters help improve the quality of air in process air inlet and regeneration air inlet.

Model Item			FDR-D500
Rotary Wheel		Major Material	Active Titanium Silica Gel
		Wind resistance (Pa)	250
Power Source			3PH/220V/50HZ
Air Processing Flow (m3/h)			500
Regeneration Air Flow (m3/h)			200
Dehumidification Capacity (kg/h)			4.6
Weight (kg)			82
Overall Dimension	L(mm)		650
	W(mm)		650
	H(mm)		1400

•Housewell dehumidifier systems operate on the principle of adsorption of water vapor from the air. The desiccant used is silica gel, arranged in a wheel-shaped rotor having thousands of small air passages.

•The desiccant wheel is housed in a cabinet that is separated into process and reactivation sections In the process section,wet air passes through the wheel, where the silica gel adsorbs the moisture. This dehumidifying process increases air temperature; and the leaving air is drier and warmer.

•To drive the moisture out of the desiccant, the wheel slowly rotates into the reactivation section, where a second (heated) air stream passes through the desiccant . The moisture from the desiccant is evaporated and the moisture-laden reactivation air is exhausted outside. The wheel cycles back into the process section where the reactivated desiccant provides continuous drying of the process air.

• Flexible design

• Low energy consumption

• Superiorperformance

• Easy to repair and maintenance