Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

Gold Tungsten Lead Copper Centrifugal Concentrator, 1. Manufacturing experience of over 20 years, 2. Low cost, 3. ISO9001:2000 - details see: https://www.machineto.com/hot-sale-gold-tungsten-lead-copper-centrifugal-concentrator-10315517

Gold Tungsten Lead Copper Centrifugal Concentrator

Overview of Centrifugal Concentrator

Centrifugal concentrator consists of two major parts, which are separation mechanism and auxiliary mechanism.

The separation structure of centrifugal concentrator is drum, which is hollow and of the shape of frustum.

The slope of drum inner surface is from 30 to 50 degree, which is made from steel plate flange welding, cast aluminum or glass fiber reinforced plastics. Drum is fixed to the axle by chassis and spins along with the axle.

Auxiliary mechanism consists of feeding device, ore discharge device, flush device and the procedure control device.

Working principle of Centrifugal Concentrator

Ore pulp is delivered by feeding pulp distributor through two location to the inner wall of drum, while the drum is spinning at high speed.

Ore pulp spins along with the drum. Under the action of centrifugal force, the heavier mineral deposits on inner wall and spins along with the drum. The lighter mineral grains spin at a speed different to drum. During the process of spin, lighter mineral grains will be discharged out of the drum. After 3 minutes, the pulp distributor will turn away from normal position and stop feeding ore pulp. After finishing discharging the tailings, discharging pulp distributor will turn away from normal position and be prepared to receive the concentrate. High pressure flushing water valve will switch on automatically and wash the concentrate down off the inner wall. Then the valve will switch off automatically.

After discharging all the concentrate, discharging and feeding pulp distributor will return to their normal positions and start another separation circulation.

Application of Centrifugal Concentrator

Centrifugal concentrator is known as centrifuge or centrifugal chute. Strong centrifugal force produced by high speed spin strengthens

the process of gravity separation and effectively recover the ultrafine ore particles. Nowadays, centrifugal concentrator is widely used for

the recovery of gold, tungsten, lead, manganese, iron, etc.

Advantages of Centrifugal Concentrator

1. very effective for the process of ultrafine ore slime, The recovery rate of 37-39 micron is over 90%.

2. Under the action of centrifugal force, the process of gravity separation is strengthened and the separation

time is much shortened. Therefore, the capacity of centrifugal concentrator is much bigger.

3.Small land coverage and high automation

Technical Parameter of Centrifugal Concentrator

Model	Drum Dia.(mm)	Drum Slope(°)	Drum Speed(r/min)	Input Size(mm)	Input Thickness(%)	Capacity(m3/h)	Power(kw)	Dimension (mm)	Weight(kg)
LX-Φ800x600(Rough)	800	4	450	-0.074	15-25	1.2-1.5	3	1920×1300×2540	1100
LX-Φ800x600(Fine)	800	5	380	-0.074	15-25	1.2-1.5	3	1920×1300×2540	1100
LX-1600	1600	5	105-405	-0.074	15-25	1.5-4.5	11	2900×1900×3900	4500
LX-2000	2000	5	105-405	-0.074	15-25	6-7.5	17	3566×2334×3900	7500
LX-2400	2400	5	105-405	-0.074	15-25	5-10	22	3700×2400×4100	12000

Customer sites of Centrifugal Concentrator

Customers Visiting Our Factory

Vice-governor of Benue State, Nigeria ( front)

Russian client

Our Factory and Workshop