Home  >  Industrial Supplies  >  Motor Parts  >  Motor Controller

1.Genset control panel with CE&ISO, 2.LED display, AMF & ATS function, 3.Operating Voltage DC8V-35V - details see: https://www.machineto.com/hot-genset-control-panel-dse702as-hc-10234447

The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal.

The Model is an Automatic Engine Control Module. The module is used to automatically start and stop the engine, indicating the operational status and fault

Conditions by means of an LCD display and a flashing LED on the front panel.

Main features(genset control panel):

micro-computer control;

automatically activated, the shutdown;

real-time display unit operating status and parameters;

visualization of the police state of graphics and logo;

quick information display unit;

LED and LCD alarm instructions;

common custom settings, can be used for import and domestic models and other.

Control features:

emergency parking control

automatic car plate

start delay control

local manually start / shutdown

remote automatic start / shutdown

start the motor from the automatic control

control of warm-up

warm Control

Cold Control

Parking / Idle Speed Control

Protection:

lubricants to protect lower

charger fail rechargeable

emergency generating units down

generating units of public alarm

generator over-voltage under-voltage over-current protection

high cooling water temperature protection

engine overspeed protection

failure of the engine shutdown

start the engine failure

Display data:

Speed of Generator

Battery Voltage

Oil Pressure of Engine

Water Temperature of Engine

generating unit output frequency of exchange

Operating Time of Generator Set

generating units with AC output voltage

generating units with the exchange of current output

Alarm instructions:

stability in the light of public alarm, indicating the red;

public warning lights flashing red display, said there is fault shutdown.

Allocation method:

controller through the front panel configuration parameters.

Operating Voltage	DC8. 0V to 35. 0V, Continuous Power Supply
Power Consumption	<3W
Alternator Input Range 3-Phase 4 Wire 2-Phase 3 Wire Single phase 2 wire	15V AC - 360 V AC (ph-N) 15V AC - 360 V AC (ph-N) 15V AC - 360 V AC (ph-N)
Alternator Input Frequency	50Hz - 60 Hz at rated engine speed
Magnetic Input Range	+/- 0. 5 V to 70 V Peak
Magnetic Input Frequency	10,000 Hz (max) at rated engine speed.
Start Relay Output	7 Amp DC at supply voltage.
Fuel Relay Output	7 Amp DC at supply voltage.
Auxiliary Relay Output (1-4)	(1)7 Amp DC at supply voltage,(2)7A 250VAC free voltage contact,(3,4)16A 250VAC free voltage contact.
Dimensions	200mm x 144mm x 50mm
Panel cutout	184mm x 139mm
Operating Temperature Range	-25 to +70°C
Storage Condition	Temperature: (-30 - 80)°C
C. T. Burden	2. 5VA
C. T. Secondary	5A
Weight	0. 55kg

Please feel free to contact us to get more infomation!