Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Chip Machines

hot airflow dryer machine, 1. Different fuel used for this machine, 2. Short time for dryer, 3.High capacity and efficiency of d - details see: https://www.machineto.com/hot-airflow-dryer-machine-for-sawdust-rice-husk-008615333820631-10349270

Hot Airflow Machine for Sawdust

1.Detail description of hot airflow machine for sawdust/rice husk

Sawdust dryer using screw converyer to continuous adding wet sawdust into dryer pipe,
so that the wet material can conveyor and scatter the high speed thermal current,so that )
it can finsh the process of dryer
It is mainly include Air heater, batch feeder, airflow dryer pipe, cylone separating device
and air blower etc .
2.Feature of hot airflow dryer machine for sawdust/rice husk

1)High efficiency of dryer, it can dryer all surface area of active dry, because the material can
be highly dispersed in the air.
2)Short time of dryer
3) Simple structure,less space demand, so that it is easy to build , operation and maintain
4)High capacity
5)Thermal efficiency can reach 60%
3. Application scope of hot airflow dryer machine for sawdust/rice husk

It can be used for producing charcoal,briquette press, blocking making, pellet, sawdust press etc, the raw material
we can choose corn/cotton etc straw,wood sawdust, sugarcane, chipper etc,
4.Parameter of wood dryer machine for making charcoal

Model	Capacity(kg/h)	Power(kw)	Size of raw material(mm)
LHO-HG400	500-800	5.5	<5
LHO-HG500	1200-1500	15	<10

5.Operating rules for hot airflow dryer machine for sawdust/rice husk

1). After installation, start the blower, check the direction it runs and see if the suction at the material inlet is normal.

2). Tie up a bag whose both ends are open around the outlet of the dust catcher.

3).Feed the material to be dried to the hopper. Remove large grain in the material before drying, which will benefit drying speed.

4). Put fuel into the furnace and light it, start the blower. When the air temprature at the outlet of the blower get to 100°C, begin feeding and drying.

5).Large piece of the material at dregs-outlet must be removed, which is favourable to feeding.

6.Cautions of hot airflow dryer machine for sawdust/rice husk

1). The machine must be grounded well.

2).The exhaust vent of the dust catcher must not be indoor, a flue pipe should be made to exhaust the gas outdoor, and the chimney must be at least 500mm higher than the roof.

3.) The large grins of material should not put into the hopper.

4).When material does not get in easily, check the vane of the blower, remove the dust sticking to it.

7. Image of hot airflow dryer machine for sawdust/rice husk

8. Contact Information of hot airflow dryer machine for sawdust/rice husk

Contact Name: Ting Song

Tel: 0086 371 55917385

Fax: 0086 371 55917385

Cell: 0086 15333826301