Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Crusher

PE Jaw Crusher, 1,Large ratio of reduction, 2,Simple structure, easy to maintain, 3,Energy saving, 4,ISO9001-2008,CQC,BV - details see: https://www.machineto.com/high-quality-pe-jaw-crusher-200-350-for-aac-production-line-10311172

High Quality PE Jaw Crusher(200*350) For AAC Production Line

ZHONGKE PE stone Jaw Crusher machine, including coarse crusher and fine crusher, is featured by large ratio of reduction, uniform size, simple structure, reliable working, easy maintenance, and low operation cost. Its compression strength is less than 320Mpa and the feeding size ranges from 125mm to 1020mm. As the preferred equipment for primary and secondary crushing, Zhongke stone jaw crusher absorbs the advantages of similar products all over the world in terms of design, production and aftersales service. It is widely applied in the mines, smelting, building materials, AAC production line, gravel production line, ceramsite sand production line, cement plant, highway, railway, water conservancy and chemicals etc.

Working principle of stone jaw crusher machine:
Under the power of motor, eccentric shaft is driven by the belt and belt wheel to make the movable jaw move up and down.

When the movable jaw ascends, the angle between toggle plate and it will become larger. Then the movable jaw plate is pushed toward the fixed jaw plate. When the pressure rises beyond what the materials can bear, the crushing happens.

Otherwise, when the movable jaw descends, the angle will become smaller . Then with the movable jaw swinging to the opposite direction and away from the fixed jaw plate, the crushed material will fall down due to gravity.

Every periodical movement of the movable jaw will put the crushing effect on the materials. The crushed materials will be discharged through the discharge opening after several periods.

Features of stone jaw crusher machine:
1. Deep crushing cavity without dead zone, improve the feeding capacity and output.
2. Big ratio of reduction, even product size, low noise, and small dust.
3. The gaskets adjusting device of discharging opening, reliable and convenient, with large adjusting range, increases the flexibility of the equipment.
4. Safe and reliable lubricating system, easy to change the parts, small maintenance workload.
5. Simple structure, reliable operation, low operating lost, excellent performance.
6. Energy saving 15%~30% for one machine, more than doubled for the system
7. Large adjustable scope of discharge opening can meet the requirements of different customers.

Technical parameters of stone jaw crusher machine:

model	feeding size (mm)	maximum feeding size(mm)	adjustable range (mm)	Handling ability (t/h)	eccentric shaft rotate speed (r/min)	Motor power (kw)	total weight (t)	Overall dimensions (L*W*H)(mm)
PE-150×250	150×250	125	10-40	1-3	250	5.5	0.8	720×660×850
PE-200×300	200×300	180	15-50	2-6	260	7.5	1.2	910×750×990
PE-200×350	200×350	180	18-70	3-10	260	11	1.5	1000×870×990
PE-250×400	250×400	210	20-60	5-20	300	15	2.8	1300×1090×1270
PE-400×600	400×600	340	40-100	16-60	275	30	7	1730×1730×1630
PE-500×750	500×750	425	50-100	40-110	275	55	12	1980×2080×1870
PE-600×750	600×750	500	150-200	80-240	275	55	15.8	2070×2000×1920
PE-600×900	600×900	500	65-160	50-180	250	55	17	2190×2206×2300
PE-750×1060	750×1060	630	80-140	110-320	250	90-110	29	2660×2430×2800
PE-800×1060	800×1060	640	160-220	130-330	250	110	29.8	2710×2430×2800
PE-830×1060	830×1060	650	160-220	150-336	250	110	30.7	2740×2430×2800
PE-870×1060	870×1060	660	200-260	190-336	250	110	31.5	2810×2430×2800
PE-900×1060	900×1060	685	230-290	230-390	250	110	33	2870×2420×2940
PE-900×1200	900×1200	750	95-165	220-450	200	110	52	3380×2870×3330
PE-1000×1200	1000×1200	850	195-265	315-500	200	110	55	3480×2876×3330
PE-1200×1500	1200×1500	1020	150-300	400-800	180	160	100.9	4200×3300×3500
PEX-150×750	150×750	120	18-48	8-25	320	15	3.8	1200×1530×1060
PEX-250×750	250×750	210	25-60	13-35	330	30	5.5	1380×1750×1540
PEX-250×1000	250×1000	210	25-60	16-52	330	30	7	1560×1950×1390
PEX-250×1200	250×1200	210	25-60	20-61	330	37	9.7	2140×1660×1500
PEX-300×1300	300×1300	250	20-90	16-105	300	55	15.6	2720×1950×1600

About us:

Henan Zhongke Engineering & Technology Co., Ltd. is specialized in heavy equipment like various crushers, stone jaw crusher machine, magnetic separators, mining machines, bricks and blocks machines, cement production line, AAC block line, etc., which is located in the middle of China. Our competitive price, high quality products and excellent after-sales service had gain us good reputation in this field.

Qualification & honour:

workshop:

delivery:

International cooperation:

Contact me: