Home  >  Construction Machinery  >  Building Material Making Machinery Parts

High-pressure Micro-powder Grinder is composed of host machine, blower, cyclone powder collector for finish products, bag-type d - details see: https://www.machineto.com/high-pressure-micropowder-grinder-10079188

Introduction of High-pressure Micropowder Grinder :
High-pressure Micropowder Grinderis used for super fine powder proccessing of non-flammable and non-explosive materials with Mohs hardness below 6 and humidity below 8%, such as kaolin,limestone, calcite, talcum,marble, barite, gypsum, iron oxid red,iron oxid green, aluminium hydroxide, pigment, bentonite and ceramic.High-pressure Micropowder Grinderhas a higher quality than ball mill.

Features and Benefits of the High-pressure Micropowder Grinder :
High-pressure Micro-powder Grinderis composed of host machine, blower, cyclone powder collector for finish products, bag-type dust collector and ventilation pipe, etc, as well as auxiliary devices (like elevator, storage bin, electrical cabinet, feeder and crusher, etc,) provided only when required by demander. In the fine grinding room, grinding roller is always hung across horizontal axis on the hanger, which shall be fixed with main axis and shovel shelf.
Pressure spring shall be firmly pressed by tension rod on the cantilever end in the bearing house. With cantilever as a supporting point, grinding roller shall be firmly pressed on inner surface of grinding ring by spring pressure. When electric machine runs due to driving device, blade on the shovel shelf will rotate synchronically together with grinding roller, which at the same time revolves around itself. Since analyzer drives its impellers turn through driving device of electric machine, adjusting the speed of analyzer determines the fineness of powder.

High grinding gorce.
Energy saving.
Less investment and high benefit.
Less processing.
Good sealing.
Excellent dust-cleaning result.

High-pressure Micropowder Grinder Working principle:
Materials, after being ground, shall be sent to storage bin by elevator and then evenly to host computers grinding room by feeder, and then shoved by blade to the space between grinding roller and grinding ring for grinding and crushing. Wind from fan into grinding room blows powder into analyzer for winnowing.

The powder failing to reach the fineness shall return for re-grinding, and the acceptable one will enter into cyclone dust collector for finish product with airflow and come out from discharging port after separating with air as finish product.

However, vapor resulting from water of material during grinding and outside gas taken in due to sealing of the whole tube will increase air quantity in the system.

To ensure that grinder works well under negative pressure, superfluous air shall be discharge into atmosphere after being purified with bag-type dust collector.

If you are interested in the by us, please or visit the website of the company for relevant prices and detailed technical parameters and specifications etc.

Specifications of High-pressure Micropowder Grinder

Model 7826 8327 9531 NO.of Roller(piece) 3 3 4 diameter of Ring(mm) φ650 φ270 φ310 Inside Dia. of ring(mm) φ780 φ830 φ950 Speed of Main Frame (r/mm) 160 140 130 Max.Input Size(mm) 20 20 25 Capacity(kg/h) 25-500 30-680 150-1000 Motor Model of Main Frame,Power Y225S-8-18.5 Y225M-8-22 Y225S-4-37 Motor Model of Blower,Power Y160L-4-15 Y180M-4-18.5 Y200L-4-30 Motor Model of Separator,Power Y160M-6-7.5 Y160M-6-7.5 Y160M-6-7.5 Total Power(Kw) 41 48 74.5

Notice: Any change of High-pressure Micropowder Grinder technical data shall not be advised additionally