Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mining Feeder

Specification, 1. Simple structure, easy adjustment, 2. Reliable operation and easy maintenance, 3. Less power consumption - details see: https://www.machineto.com/high-efficiency-vibrating-swaying-feeder-for-gold-ore-feeding-10316460

This kind of feeder usually used as fine ore feeding

Swaying feeders are widely used in mining. In the mining line, swaying feeder is generally installed in front of the grinding equipment. It can send the ore to ball mill evenly and continuously.

Swaying feeder can effectively control the feeding capacity to match with the capacity of the whole milling plant.

Notes: The motor can be replaced by speed adjustment motor to adjust the feeding capacity according to the customers’ requirements.

Structure and working principle

1 valve body 2 valve door 3 connecting rod 4 eccentric wheel

5 reducer 6 coupler 7 motor

Working principle

The device is generally installed in the hopper lower part of the discharge, the materials landed in the body. While working, the motor drives reducer through coupler, and through eccentric disk so that the equipment be placed back and forth movement, which is expected to complete the regulated feed. By adjusting the eccentric plate on the scale, the charge is adjustable.

Technical parameter

Type		BG300*300	BG400*400	BG600*600
Inlet mouth (L×W) (mm)		3.00*300	400×400	600*600
Eccentric journey (mm)		0~90	0~170	0~200
Swing numbers (nth/min)		47	47	47
Feeding particle max. (mm)		30	35	50
Capacity (t/h)		6.5	12	25
Motor	Model	Y80S-4	Y90S-4	Y90L-4
	Power	0.75	1.1kw	1.5
	Rotation speed	1390r/min	1400r/min	1400r/min

Some pictures about swaying feeder

How to operate and maintain the equipment

1. Double-check equipment and hopper bolts fastening the mouth if there is loose.

2. Check whether the ministries lubrication point is full of lubricating oil.

rolling bearing grease filling capacity of the cavity 2 / 3.

reducer injects within 30 # engine oil, the oil reaches worm gear tooth surface high degree of 1.5 times.

3. Adjust the distance between flashboard to swing according to the feeding particle requirements.

4. When equipment is starting, the body does not allow too much of the material, it should be the normal operation of equipment before it can start feeding.

5. The first stop should be to stop feeding, the electrical motor can be closure after all the materials are discharged.

Swaying feeder usually used in the similar process of gold, silver, copper, iron, lead zinc and graphite, etc