Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Other Refrigeration & Heat Exchange Equipment

Harmonica Tube Straightening and Cutting Machine, 1.high performance, 2.hydraulic rapid-dies changing device - details see: https://www.machineto.com/harmonica-tube-straightening-and-cutting-machine-10246607

Harmonica Tube Straightening and Cutting Machine

Main application

the equipment is used for straightening and cutting aluminum harmonica tubes of parallel flow codensers.The equipment is driven by a servo motor.The raw material is conveyed by a precision linear guidance rail.Cutting of the pipes is cuducted through a revolving knife for a linear knife.

Main characteristics

The equipment is also equipped with a fully-automatic decoiler.

Coil inner diameter :450-500mm;width:300-330mm;decoiler bearing weight:300kg;

coil feeding method:manually place the coil on the decoiler,and screw up the coil expansion core;

the decoiling method is stable and reliable.The equipment has a high cutting acceracy and a fast working speed.It is able to cut different pipes by adjusting the distance of the straightening rolling wheels.It takestwice or multiple charges to cut the aluminum tube when the cut-to-length is very large.

Technical parameters

1)Production rate:4 seconds per time(based on cut-to length at 650mm)

2)production rate:2.5seconds per time( based on cut-to length at 650mm)

pipes to be straightened and cutted per time:2pipes;

feeding length of the aluminum pipe:200-900mm(twice or multiple charges to cut the aluminum tube when the cut-to length is very large

Main machine dimension:4500*850*1300mm(the length is 15m if the decoiler is included)

Decoiler overall dimension:1400*1300*1800(2sets)

flat aluminum tube thickness:1-3mm

flat aluminum tube width:14-32mm

cut to length:larger than 100mm

length straightening accuracy<+_0.1mm

width straightening accurary:+-0.04mm/850mm

thickness straightening accurary:+-0.02mm/850mm

replacement time of coils:3min

preparation time of cutting tubes with a different width:<=15min