Home  >  Farm Machinery  >  Farm Machinery  >  Silos

1.Simply installation method: assembly., 2.Operated easily ., 3.Easy maintainence., 4.long life time ,20--50 years - details see: https://www.machineto.com/grain-steel-silo-made-of-galvanized-sheets-with-flat-bottom-10191879

Silo for Sale.

Self Introduction

Established in2007,Tai’an Shelley Engineering Co., Ltd,located in Great Wall Street 96, Tai’an city, Shandong province, China, which is one of the mostprofessionalsupplier of steelfarm and commercial storage bins/silos.Life circle of the products is 20-50years. Our products are completely complying with the national standard of GB50322-2001"The Grain Code of Silo Design" and have reached the advanced quality levels in performance.

Silo Type Generally Used in Mill

Less than 1000t(include) per silo:Adopt hopper bottom silo, which can natural flow, power savely, but capacity limited for the steel leg can support limited weight.

More than 1000tons per silo:Adopt flat bottom silo, which can storing more grain, up to 10000t, but we should add a sweep auger in the silo bottom, to run the grain out.

The most cost savelyt silo:Flat bottom silo without Sweep auger, unloading by manual. this situation is suitable for different tons. but we need spent on manual cleaning in silo.

Feed Silo Project TSE have done:

USA Cargill, 2sets *500tons silo, storing corn, in the past 6years, it never been maintained.

Generally speaking, we install ventilation system and temperature system in grain silo, the accessories is simple, cleaner, elevator, silo, these are enough.

you can see the flow path picture. the small room beside, truck unloading the grain into the bottom in the room, there is a belt conveyor in the bottom, it convey the corn to elevator, after elevating the grain goes into cleaner, after cleaning, corn goes into 2 silos through the conveyor on the silo roof. After unloading from silo, corn goes into mill through the conveyor on the ground.

This plastic model is made for a Congo client in 2013.7, which is also in feed mill, 2sets*500tons silos.

Characteristic of Feed Silo

Feed silo is generally used for storing grain, especially for corn/maize, before grain goes into mill, so the silo is build beside the mill. We purchase quantity of grain before the grain price raise, the silo can keep the grain in a good quality for a long time, and the corn can be uses for half one year or one year in the silo. After unloading from the silo, the grain is conveyed to mill by conveyor, when we use silo in feed mill, precleaning is necessary, we can add the cleaner before the silo, or after silo, all in all, make sure the grain is clean before milling. (Poultry equipment)

The silo is installed beside the animal room, send feed into the room through the auger pipe.

ttension, the silo can not filled in water.

Our Service:

1, Gathering requirement information.c

2, Design the flow path

3, Give offer

4, Installation.

All silo models and handling device specification

Silo type	Hopper bottom silo		Flat bottom silo
Bottom Cone Degree	45 degree	60 degree
Diameter	1.8m-11m	1.8m-7.334m	3.6m-20.1m
Capacity	5.4t-1428t	5.8t-755t	30t-10682t
Volume	7.2m3-1855m3	8.4m3-701m3	39m3-13873m3
Accessory Equipments:
- Bucket Elevator with capacity from 1 tone/hour to 400 tone/hour - Chain Conveyor with capacity from 1 tone/hour to 400 tone/hour - Screw Conveyor with capacity from 1 tone/hour to 200 tone/hour - Elevator Towers - Electrical and Manuel controlled Slide gates - Distributors with 1 in 2/3/4/5/6 out - Catwalks - Spout Pipes
Machines:
- Drying Machines ( Tower Type and Horizontal Type ) with capacity from 5 tone/hour to 50 tone/hour - Mill Machines with capacity from 5 tone/hour to 50 tone/hour - Pellet Machines with capacity from 5 tone/hour to 50 tone/hour --Level sensors, aeration system with centrifugal fan, temperature control system and sweep auger, dedusting system as an option.

Factory situation and Certification:

Welcome to your enquiry.