Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Hoists

10T electric hoist, 1,Capacity:1-30t, 2,Compact structure and low noise, 3,Good quality,best price, 4.ISO/BV pass - details see: https://www.machineto.com/good-quality-wire-rope-10t-electric-hoist-10097052

10T electric hoist from Xinxiang HY Crane

10Telectric hoist introduction:

Introduction:	Small sized lifting equipment, can be mounted on single beam, bridge, gantry and arm cranes.
Application	Widely used in factories, mines, harbors, warehouses, cargo storage areas and shops, essential in raising working efficiency and improving working conditions.
Hoist motor:	taper type rotor motor with braking, made by nanjing special motor factory, it is of the best quality motors, bigger torque, so it can be adapted to moving frequently, the maximum torque is 2.4-3 times than the rated torque.
Single Speed or Double Speed	Model CD1 electric hoist has only normal speed, which can satisfy normal application.
	Model MD1 electric hoist provides two speeds: normal speed and low speed.

10T electric hoist technical parameter:

Model		CD/MD
Capacity		Ton		0.5	1	2	3	5	10	16
Hoisting height		M		6,9,12	6,9,12,18,24,30				9,12,18,24,30
Hoisting speed		M/MIN		8;8/0.8	8;8/0.8				7;7/0.7	3.5;3.5/0.35
Travel speed		M/MIN		20/30	20/30	20/30	20/30	20/30	20/30	18
Wirerope		Dia.(mm)		4.8	7.4	11	13	15	15	17.5
		Spec.		6x37+FC	6x37+FC
Hoisting motor	Type	Type		ZD121-4	ZD122-4	ZD131-4	ZD132-4	ZD141-4	ZD151-4	ZD151-4
	Power	Power(kW)		0.8	1.5	3	4.5	7.5	13	13
	Rotation speed	Rotation speed(r/min)		1380	1380	1380	1380	1400	1400	1400
	Current			2.2	4.3	7.6	11	18	30	30
Travel motor	Type	Type		ZDY111-4	ZDY111-4	ZDY112-4	ZDY112-4	ZDY121-4	ZDY121-4	ZDY121-4
	Power	Power(kW)		0.2	0.2	0.4	0.4	0.8	0.8x2	0.8x2
	Rotation speed	Rotation speed(r/min)		1380	1380	1380	1380	1380	1380	1380
	Current	Current(A)		0.72	0.72	1.25	1.25	2.4	2.4	2.4
Power		3P AC/380v/400v/415v/440v380V,50HZ/60HZ,

Hoist gearbox	Specially treated gears for high wear resistance, each geared shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire rope	•Hoisting ropes comply with the exporting standards •The leading rope taken by the drum does not slip sideways when slack
Rope drum	Grooved hoist drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided
Drum shaft	Resolves on ball bearings for ensuring smooth running.
Electric apparatus controlling system	Model CD1 and MD1 hoist is composed of the contractor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380/36 or 24V (safety voltage)
Rope guide	•Comes in two halves, ensuring easy accessibility •It encircles the drum completely so that the rope may not uncoil even when the hoist is in unloaded condition •Rope guides of our company is thickened and dilated, so that it is not easy to be damaged