genuine part replacement taisei kogyo filter element filter material made in japan

This part, element is for the hydraulic filter which remove impurities from the fluid on the hydraulic circuit - details see: https://www.machineto.com/genuine-part-replacement-taisei-kogyo-filter-element-filter-material-made-in-japan-10227922

Condition:New	Type:Suction Filter	Structure:Vacuum	Place of Origin:Japan
Model Number:SFN-	After-sales Service Provided:No overseas service provided

genuine part replacement taisei kogyo filter element filter material made in japan

VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV

genuine part replacement taisei kogyo filter element filter material made in japan

VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV

[SFN]

1. Installed inside a tank of mineral oil.

2. Stainless steel notch wire type.

3. Filtration rating of 60,100,150 and 200 mesh as standard.

Caution

When mounting/dismounting the filter to and from a pipe, set a wrench on the hex part of the coupling.

We are committed providing secure packaging

in our use of packaging materials and bubble wrap.

We have thk other products as follows :

[SFT]

1. Installed inside a tank of mineral oil.

2. A stainless steel wire type.

3. Filtration rating of 60,100,150 and 200 mesh as standard.

Caution

When mounting/dismounting the filter to and from a pipe, set a wrench on the hex part of the coupling.

[VN]

1. Designed to prevent air bubble accumulation inside the suction filter with case.

2. Stainless steel wire elements of 60,100,150 and 200 mesh are provided as standard.

3. Clogging of filter element can be checked by an indicator.

4. Built-in relief valve prevents risk due to clogging.

5. I type (visual observation) indicator is installed as standard. E type (electric contact together with visual observation) indicator and magnet can be installed as additional option.

Note: Magnet cannot be installed on site after purchase of filter.

6. Dust cover of I type and E type indicators are made of plastic. Exercise caution when handling solvents (e.g.thinner).

7. Indicator is horizontal and can be viewed from any direction.

8. Indicating differential pressures:

Green (Start of red): 0.012MPa

Red (All red): 0.02MPa

9. I type indicator is reset manually. E type indicator is reset automatically.

10.Please contact us for use of fluid other than mineral oil on packing O-rings and parts.

Thread type companion flange is available in additional option.

[UL]

1. It’s a most standard “Low pressure Inline Filter with T type joint ”.

2. “BLUENET” was recently released. It does have re-usable part, CORE. ”.

Therefore it’s possible to low running cost and less industrial waste. (*Note 1)

3. There are many options such as visible or electric contact indicator for differential pressure between inlet and outlet.

4. Flow direction can be changed by turning Cover-ASSY 180 degrees

5. Easy to replace elements for upward removal.

6. Elements are common to all “U” Series (UL,UM,UH).

7. It can be use for return line filter.

8. Please contact us for use of fluids other than mineral oil on packing, O-rings and other parts.

Maximum operating pressure of element	Differential pressure resistance for element	Option	Standard equipment
Maximum operating pressure of element	Differential pressure resistance for element	Indicator pressure (All red)	Minimum operating pressure of relief valve
3.5MPa(*Note 2)	0.7 MPa	0.3 MPa	0.35 MPa

(*Note 1) Port Size : 03A~16A,

Filtration rating : 3CB,8CB,25CB,10UB,20UB

(*Note 2) Impulse test : 0 to 3.5MPa × 10⁷times

Packaging Detail:Standard secure packing for export

Delivery Detail:Orders ship 10~20 days after payment is confirmed.