Full-auto BGA welder AT400

Full-auto BGA welder AT400, *Gorgeous outline,full auto, *meet leadfree technology, *Serve motor drive,precise to 0.01 - details see: https://www.machineto.com/full-auto-bga-welder-at400-10135897

Place of Origin:Guangdong China (Mainland)	Brand Name:shuttle star	Model Number:RW-AT400	Input Voltage:single phase 220V
Dimensions:L1000W900H560mm	automation degree:full-auto

FULL-AUTO BGA Welder AT400

Warranty:

1 year, in the warranty, if any parts are broken not artificially, we will replace a new one and the shipping cost is on our party.

Specifications:

PCB dimension: W20×20~W450×550mm

PCB thinkness: 0.3~4mm
BGA dimension: 1mm×1mm~70mm×70mm
PCB locating way: Outer or Jig

Temperature control: K-type thermocouple, controlled
Lower hot-air heater: 600W

Upper hot-air heater: 1000W

Bottom IR heater: 3000W

Min pitch of BGA ball: 0.15mm

Placement precision: 0.01mm

Placement pressure: Min 20g

Max. BGA weight: 300g
Power supply: single-phase 220V,50/60Hz,

Gas supply: 0.5-0.8MPa,60L/min

Machine dimension: L1000×W900×H560mm

Weight: Appox. 210KGS

--------------------------------------------------------------------------------------------------

Features

Upper hot air heater head and mounting head are designed 2 in 1, have both the auto soldering and mounting function, auto memorize operating position;
Upper heater has a special rapid cooling function toward BGA, meets lead free technology;
X, Y, Z table are driven by serve motor, operated by rocker; can micro-adjust when getting close to the target point, Min resetting precision 0.01mm;
Color optics alignment system with functions of split vision, zoom in/out and micro-adjust, equipped with aberration detection device; with auto focus and software operation function, 22 X optical focus, able to rework BGA sized up to 70×70mm;
Suction nozzle can identify material and mounting height automatically, nozzle can be rotated 360°, and can control the gas pressure within a small range;
Nitrogen can be used for protecting soldering & desoldering;
Embedded industrial computer, touch screen interface, PLC control, real-time profile display, able to display set profile or 9 practically-tested profiles;
8 segments of temperature up(down) and 8 segments constant temperature control, no limited profiles are stored; profile analysis can be carried out on the touch screen; with computer communication function, communication software is attached;
Three heaters(upper/lower hot air heater, bottom IR heater) heating independently, can rework BGA on any place of the PCB;
Pick up BGA and move it to the place for solder automatically; drive BGA to destination after desolder automatically;
Equipped with monitoring camera to observe the whole reworking process, balls melting status can be seen through the camera;