Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Carding Machines

FN271F carding machine for cotton is applicable to open,card,and blend various types of fiber such as wool cotton and chemical - details see: https://www.machineto.com/fn271f-high-production-carding-machine-for-cotton-10272979

FN271F high produciton carding machine for cotton

Application: It applies to the chemical fiber and hybrid fiber opening, carding, mixed and cluster tops a certain specification, there are regular articles on the inside ring for use under the procedures

Main specifications and technical features

Increase the width of machine1200mm1500mm	roller speed600 r / min (VVVF)
The scope of application of raw materialsChemical fiber and blended, length 25-127mm, size 0.8-30D	Adolf working diameterφ650mm
Feeding mode: Double-box volume automatic photoelectric control for feeding	Doffer speed :10-75 rev / min (VVVF)
7-Quantitative output tops 20 grams / m	Cleaner air volume (continuous): 2200 meters3/h.Each
Multiples of the total stretch :32-140-fold	Device be used with ring forms: manual or three-and four-bit-for-tube-station automatic
Be the maximum speed: 200 m / min	Applicable specifications cans: φ600mm × 900mm φ400mm × 1100mm (optional)
Maximum capacity: 240 kg / table	The entire machine power: 12KW
Working diameter of the cylinderφ770mm	Account for groundL×WWidth 1.2m11000×2290width 1.5m 11000×2590
Cylinder speed: 400 r / min (VVVF)	Machine Weight11000kg
work roll diameterφ250mm

Features

1, feed-based metal parts, hardware detection and cotton debris layer thickness from the stop to protect the machine safety.
2, with the speed of roller stop device is too low to prevent the occurrence of blocking cars.
3, with the top off device shall stop.
4, has a suction device to draw air flying machine short fiber wool to prevent traffic congestion, lower frequency.
5, enter the gross floor Autoleveller system by the automatic adjustment in order to ensure the stability of uniform tops.
6, three workers and a Four-cylinder automatic for loop can be further reduced the labor intensity of workers.
7, electrical control cabinet installed on the machine in front of the rack, touch-screen machines installed in the casing on the left side of the front, easy to operate, increasing the work space.
8, automatic control of a programmable logic controller and touch screen communication, through the touch screen to set up and modify the process parameters and the right time to observe the operation of moving parts and the emergence of state failure, employing dialogue machine programmable logic controller control the frequency converter so that a more stable, thus ensuring the normal operation of the machine.
9, the whole casing closed safety, appearance neat and beautiful.