Home  >  Farm Machinery  >  Farm Machinery  >  Feed Processing Machines

float fish pellet machine, 1.fish feed pellet size 1-10mm, 2.fish feed floating 24h, 3.fish food machine output 0.1-2t/h - details see: https://www.machineto.com/floating-fish-feed-machine-in-feed-processing-machines-10184467

Fish float pellet machine

Floating Fish Feed Machine Introduction:

Floating fish feed machine is widely used for producing grains into high-grade aquatic feed pellets for fish, catfish,
shrimps, crab etc. The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours.

Floating Fish Feed Machine Working process:

After the material is sent into feeding device, they will be pressed by the screw shaft with high pressure and
temperature which makes the raw material fully cooked and sterilized. Then the pressed material will be formed intopellets by shaping mould. You can change different moulds to make pellets withdifferent diameters. After that a
cutting device will cut the formed pellets into different length as required.

Floating Fish Feed Machine Application and features:

1.According to different requirements,variety shapes of high-grade feed pellets for fish, shrimps etc can be produced.

2.The finished pellets can keep floating for 3-15 hours without pollution to water.

3.The floating time can be controlled by the puffing degree adjustment.

4.Floating fish feed machine can make pellet from dia.1.0mm-20mm just by changing the mold.

5.Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.

6.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also
makes the pellets easily to digest..

Technical parameter:

Dry type :

Type	Capacity(t/h)	Power (kw)	Feeding power (kw)	Screw diameter(mm)	Cutter power(kw)
DGP50-C	0.06-0.08	11	0.4	φ50	0.4
DGP60-C	0.12-0.15	15	0.4	φ60	0.4
DGP70-B	0.18-0.25	18.5	0.4	φ70	0.4
DGP80-B	0.3-0.35	22-27	0.4	φ80	1.1
DGP90-B	0.4-0.45	30-37	1.1	φ90	1.5
DGP120-B	0.5-0.7	55	1.1	φ120	2.2
DGP135-B	0.8-1.0	75	1.1	φ133	2.2
DGP160-B	1.2-1.5	90	1.5	φ155	2.2
DGP200-B	1.8-2.0	132	2.2	φ195	3.0

Wet type:

Type	Capacity (t/h)	Power (kw)	Feeding power(kw)	Screw diameter (mm)	Cutting power (kw)	Tempering power (kw)
DSP60-B	0.18-0.2	15	0.75	φ60	0.75	0.37
DSP70-B	0.25-0.3	18.5	0.75	φ70	0.75	1.5
DSP80-B	0.35-0.45	22-30	1.1	φ80	0.75	1.5
DSP90-B	0.5-0.6	37	1.1	φ90	1.1	2.2
DSP120-B	0.8-1.0	55	1.1	φ120	1.1	2.2
DSP135-B	1.2-1.5	75	1.5	φ135	2.2	2.2
DSP160-B	1.8-2.0	90	2.2	φ155	2.2	3.5
DSP200-B	3.0-5.0	132	2.2	φ195	3.0	4.5