Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

Our water to water heat exchanger is constructed by stainless steel fine tubes with high heating efficiency heating capacity. - details see: https://www.machineto.com/fin-enhanced-water-to-water-sidearm-heat-exchanger-10242098

We produce the following products for solar, boiler or heat pump heating system

Stainless steel pool heat exchangers

Titanium pool heat exchangers

Sidearm heat exchangers

Stainless steel electric pool heat exchangers

Titanium electric pool heat exchangers

Water to water heat exchanger (sidearm heat exchangers)

Designed using the natural thermosiphon on the domestic hot water side, our Outdoor Wood Furnances not only provide faster heating at a greater capacity than traditional sidearms, they prevent cross contamination in potable water application.

While the capacity of traditional sidearm heat exchanger is determined by the length of sidearm tubes and their heat transfer efficiency is comparitively very low.Instead of using two bare copper tubes,our finenhanced heat exchangers made of stainless steel and will have high heat transfer efficiency resulting from the utilization of an internal finned tube.This fin-enhanced design has a surface are five to eight times bigger than the bare tube design and produces significant turbulence on the system side.Our fin enhanced sidearms provide a larger capacity and faster hearing using a shorter unit.Fin enhanced sidearms are available upon request.

Advantages:

• Extremely Efficient

• Compact Size and Easy Install

• Easy Cleaning Mechanically

• No Complain for Hot Water

APPLICATIONS

Outdoor wood boilers

Solar hot water heating

Domestic hot water heating

Floor heating

Typically the domestic water is circulated by means of the thermosiphon principle which saves on the cost of a pump and the associated electrical costs,In cases where faster heat recovery is required the domestic hot water should be circulated by means of a pump.Pump circulation will typically provide a heat recovery 3 to 4 times greater than thermosiphoning.We offer the following three models:

Model	Nominal Capacity		System Water				DHW Water				DHW Side	System side
			Flow Volume		Pressure drop		Flow Volume		Pressure drop
	kW	kBtu/Hr	l/min	USGPM	kPa	psig	l/min	USGPM	kPa	psig
FES-95	5.43	18.5	1.94	0.5	4.9	0.7105	4.33	1.1	13.9	2.0155	3/4"	3/4"
FES-115	6.6	22.5	2.36	0.7	5.1	0.7395	5.26	1.4	14.2	2.059	3/4"	3/4"
FES-95DW	4.55	15.5	1.94	0.5	5.3	0.7685	4.33	1.1	14.6	2.117	3/4"	3/4"
FES-115DW	5.28	18.0	2.36	0.7	5.6	0.812	5.26	1.4	15.1	2.1895	3/4"	3/4"