Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Other Industrial Filtration Equipment

Clean Room FFU, 1.Easy to install, 2.Low spread of chemical gases, 3.Low energy consumption, 4.We can produce as per requests - details see: https://www.machineto.com/ffu-10229145

Clean Room FFU

Features:

1.Stainless steel or paint cold rolled sheet fan filter unit.

2.Composed of materials which have low spread of chemical gases.

3.Low energy consumption, lower operation costs.

4.Can achieve high value of total static pressure at the maximum air flow.

5.Easy to install between clean room ceiling frames.

6.Low noise, uniform air velocity system design, uniform air velocity.

7.Using well-known brand fan, no need maintenance.

Notes:Our FFU is a fan filter unit intalled in the suspended ceiling for turbulent and laminar flow clean room. The overall design is flexibe, easy to install on some suitalbe ceiling frames. When the hepa filter adopt knife edge frame, this unit can also be used for sump sealing ceiling frame.It can easily match any suspended ceiling frames according to design specifications to achieve the requirements of the cleanliness levels of 100, 10 and

Easy to install between clean room ceiling frames.

The design of the fan filter unit enable it to be easily installed in the ceiling frames without clamps. In order to change the HEPA filter more easily and quickly, it is recommended to prepare a matching panel to facilitate the replacement of the filter in the clean room.

Composed of materials which have low spread of chemical gases.

To meet certain special industrial requirements,all of the materials for the fan filter unit have passed the test for low spread of chemical gases.

Low energy consumption to lower operation costs

Single or three phases, high efficiency, long service life, A/C motors no need maintenance. And also provide speed controller and electronic rectifier electric motor as options to reduce energy loss and cold load and thus reduce the overall operation costs.

Can achieve high value of total static pressure at the maximum air flow.

Adopt low resistance non-separator HEPA filter and the high total static pressure fan.Can provide 50 to 100Pa static pressure outside the machine at the rated air flow.Can add primary efficiency filter.

FFU Filter Unit Parameters:

Model		570#	600#	1170#	1200#
Nominal Sizes(mm)		578×578×300	608×608×300	1178×578×300	1208×608×300
Filter Sizes(mm)		570×570×69	600×600×69	1170×570×69	1200×600×69
Fan		280#	315#	315#	355#
Air Flow(m3/h)		600~800	700~850	1000~1200	1000~1300
Voltage/Current		220V/0.85A	220V/1.3A	220V/1.3A	220V/1.8A
Speed Control		Air flow can be adjusted by speed governor.
Filter Particles		0.1~0.3 micron
Cabinet Material		Anti-static plastic spraying of cold rolled steel plate/aluminum alloy/ stainless steel
Noise Value		49~60 Decibel

We can produce as per reasonable parameters and requirements from customers.