Home  >  Industrial Supplies  >  Cleaning Equipment Parts

Water atomizer nozzle could adjust the flow rate, Pressure and External Type, Flat fan spray or Full cone spray, Spray fine mist - details see: https://www.machineto.com/external-type-water-atomizer-nozzle-10213134

Pressure Principle

water atomizer nozzle is the most widely used and therefore a large range of capacities and spray patterns are available.Liquid capacity ,air capacity and droplet sizes can be adjusted by regulating the air and liquid feed pressures and the two fluids are mixed inside the water atomizer nozzle prior to be ejected.

Basic Information:
Siphon Type
Thread size: 1/8; 1/4; 1/2
Material: SS; brass
Spray Pattern: Flat fan spray

Design Feature:

1.Pressure Type water atomizer nozzle
Air pressure and liquid pressure both are demanded.

With needle, the flow rate could be adjusted by screwing the needle; or, flow rate could not be adjustable.

2. For pressure type water atomizer nozzle , there are THREE spray pattern:

Flat Fan spray pattern , Round Spray pattern, and wide angle spray pattern.

Flat fan spray's angle is about 70 degree;

Flat Spray:

Round Spray

3.Inner structural design makes liquid and air mix fine, then sprays fine. Normally, we could increase the air pressure or reduce the liquid pressure, so that we could make the water atomizer nozzle sprays more fine droplets( about 30micron).

4.Keeping liquid pressure and air pressure unchanged, as water atomizer nozzle could adjust liquid flow rate, then it also could spray according to your requirement.

Following is the detailed spraying pics of water atomizer nozzle we have tested for your reference: