Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Cutting and Forming Tools  >  Turning Tool

External turning tool, Insert type:CN--1204--, Pin:MCT617, Clamp:HL1814, Clamp screw:MCS625 - details see: https://www.machineto.com/external-turning-tool-10150910

External turning tool

1.firm clamping

2.high precision

3.easy insert replacement

4.general use

External turning tool

External turning tool

Maybe you will ask:

what’s the different between CNC tools and ordinary tools?

C:Suit tools into CNC suit and ordinary suit, the difference between the two lies in blade species,We also can provide different kinds of blade, to meet your needs.You can use a tool rod, we'll match you up with corresponding blade, and we will always provide you with excellent quality, price preferential blade.

What’s the advantage of your turning tools?

C;Due to its without regrinding, indexable and replacement of the blade, thereby,it can reducing the tool’s grinding cost and improve the cutting efficiency

What’s characteristics of External turning tools?

C:

1. firm clamping
2. high precision
3. easy insert replacement
4. general use
5. suitable to use cutting fluid
6. suitable to apply through,coolant system

with outer box

The tool is composed by two parts :holder and insert:and the holder is clamping ,and the insert if for cutting

the use of External turning tool:It can use to processing the surface of inner hole ,branch hole and blind hole

R means :right hand holder

right hand tool:from right to left,to deal with the component’s diameter

The benifits:

1.It can resist high temperature,

Improve the processing speed:in the general lathe,our processing speed will be 1.5~2times faster than ordinary cutters,and it will help you to improve your work speed.

2.Enhanced the surface gloss of the cutting pieces,and improve the product’s quality

3.the quality is more stable than ordinary cutters

composite type

Warning:

1.

The blade should not too long than holder , if the blade is too long ,it will weakend the holder’s rigidity,when cutting it ,it’s easy to be vibrated and influence the surface’s flash.

2.

The tool tip should be aim at the center of the component, the height of the tool will be cause the change of the turning tool’s angle to influence the cutting.

3.

The shim need to smooth ,and as much as possible to reduce the number of slices ,2-3tablets is enough ,and if the shim is too much or not smooth ,it will cause the vibrate and influence the cutting.

4.

When installed ,you need to tighten the holder screw,and generally ,you need to tighten the two screws.when tighting it,you need to tighten it one by one.what’s more ,you need to use the special wrench preferably without bushing,to avoid the screw damage

CKNR/L