Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

1.Steam heat exchanger, 2.Plates:Stainless, Ti, 3.Frame:Carbon steel, 4.Gasket:NBR/ EPDM/ VITON, 5.Application:steam heating - details see: https://www.machineto.com/equal-alfa-laval-ts20m-steam-heat-exchanger-190kg-s-16bar-gasket-plate-heat-exchanger-sh200-series-10241737

Equal Alfa Laval TS20M Steam Heat Exchanger 190kg/s 16bar Gasket Plate Heat Exchanger SH200 Series

Model	SH200
Cross Reference ALFA LAVAL	TS20M
Height, H [mm]	1405
Width, W [mm]	740
Min standard length, L [mm]	900
Max standard length, L [mm]	2700
Vertical port distance, VC [mm]	698
Horizontal port distance, HC [mm]	363
Max temperature	180
Max pressure [barg]	10/16
Flange size	DN200/8”
Max. flow rate [kg/s]	190

Material of Plate		Suited Liquid Kinds
Stainless Steel (AISI304.316 Etc)		Pure Water, Normal Water, Oil for eating, Mineral Oil
Ti, Ti-pd		Sea Water, Saline Water, Mineral Water
20Cr, 18Ni, 6Mo (254SMO)		Dilute Sulphuric Acid, Organic Water Solution
Ni		High-temp and concentration caustic soda
Hastelloy (C276, D205, B2G)		Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Material of Gasket	Operating Temperature ° C		Suited Liquid Kinds
NBR	-15~+135° C		Water, Sea Water, Mineral Oil, Salinous Water
EPDM	-25~+180° C		Hot Water, Steam, Acid, Alkali
F26	-55~+230° C		Acid, Alkali
TPF	0~+160° C		High Concentrated Acid, Alkali, High temperature Oil, Steam

Gasket Plate Heat Exchanger Standard Design

Gasket plate heat exchanger, also called plate and frame plate heat exchanger, consists of a pack of corrugated metal plates, The corrugation of the plates provides the passage between the plates, the two fluids transfer the heat between the channels. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The gasket between the plates seals the inter plate channel and directs the fluids into alternate channels. The number of plates is determined by the design: the temperature program, flow rate, pressure drop and physical properties of the fluids,. The plate corrugations promote fluid turbulence and the plate contact point support the plates against pressure. The frame plate and the pressure plate are fixed to a support column. Connections are located in the frame plate or pressure plates,this depends on the flow pass.

Advantages of the Baode Gasket Plate Heat Exchanger

*Less splace & more efficient
Baode Gasket Plate Heat Exchanger is compact size! With the compact designs they just need 22–50% less space in the system than a comparable shell-and-tube heat exchanger. so they require up to 75% less cooling media, you just need a smaller pumps that will consume less energy.

*Six times more efficient than shell & tube heat exchanger.

Compare with Shell-tube-heat exchanger, Baode gasket plate heat exchanger / Frame and plate heat exchanger offers up to six times greater heat transfer efficiency. The special corrugate plate pattern creates a high level of turbulence which, in combination with the low liquid volume and high heat transfer values. This make easy to control the heating or cooling effcient.

*Easy maintenance

When cleaning is needed, gasket plate heat exchanger can easily be opened, giving access to the plate surfaces, use pressure water or certain liquid to clean.

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support

Certified by ISO9001, CE, UL, WRAS, ROHS, CCS, etc.