Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

1.Beer plate heat exchanger, 2.FDA class gasket., 3.Stainless steel clad frame, 4.Plate material:AISI 316/304 - details see: https://www.machineto.com/equal-alfa-laval-m6-m6m-stainless-steel-frame-fda-class-nbr-beer-plate-heat-exchanger-for-cooling-and-heating-of-brewery-bs60-10241591

Equal Alfa Laval M6/M6M Stainless Steel Frame FDA class NBR Beer Plate Heat Exchanger for Cooling and Heating of Brewery BS60 Series

Model	BS60
Cross Reference BAODE	M6, M6M
Height, H [mm]	920	940
Width, W [mm]	320	330
Min standard length, L [mm]	500	500
Max standard length, L [mm]	1500	1500
Vertical port distance, VC [mm]	640	640
Horizontal port distance, HC [mm]	140	140
Max temperature [°C]	180	180
Max pressure [barg]	10	16
Flange size	DN50/2”	DN50/2”
Max. flow rate [kg/s]	16

Working Principle

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of two fluids

between which heat transfer will take place. The plate pack is assembled between a frame plate and a pressure

plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the channel and directs

the fluids into alternate channels. The number of plates are determined by the flow rate, physical properties of the

fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the

plates against differential pressure.

Frame

The plates and the pressure plate are located by an upper bar and a lower bar, both of which are fixed to the support

column. On the largest type some tightening bolts are equipped with ball bearing washers in order to facilitate opening

and closing of the unit. The frame is designed for mounting on a floor only. Standard feet are fixed. One unit can contain

several sections, separated by connection plates with interchangeable connections.

Plates

The corrugation of the plates provides a passage between the plates, supports each plate against the adjacent one and

enhances the turbulence, resulting in efficient heat transfer. Corner ports and gaskets are arranged so that the two media

flow through alternate channels. The plates have a chevron pattern for maximum strength at high working pressures.

Different chevron designs are available, in order to obtain optimal high heat transfer and low pressure drop. A unique

distribution area provides an even flow over the plate surface. The plates are reversible and have parallel flow, which means

only one type of plate is needed.

Dependable Design

The BAODE gasketed plate heat exchangers provides gentle, yet efficient, heating and cooling and meets all sanitary

requirements. Typical applications include dairy, food and beverage, and other sanitary processes such as:

Milk and beverage processing

Wine tempering

Bottled water treatment

CIP (Cleaning-in-Place) heating

Reverse osmosis water

Cooling and heating of dairy, brewery, beverage and viscous products and milk pasteurization and pasteurization in some applications

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support