Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Drag Chain

energy drag chain company, 1cost effective, lightweight,, 2offers a large interior space, 3.works especially well - details see: https://www.machineto.com/e35-cable-chain-with-bottom-cover-energy-drag-chain-company-10152157

E35 cable chain with bottom cover plastic bridge machine cable chainfeatures:

1.smaller side links and thinner crossbars when compared to standard E4 cable carriers

2.It's cost effective, lightweight, and still offers a large interior space for multiple cables and hoses.

3.E45 Light works especially well in unsupported, short-travel applications and vertical hanging or standing travels.

Features and benefits:

1.Lightweight

Typical applications:

1.Machine tools

2.Material processing

3.Stone-cutting equipment

4.Woodworking machinery

5.Vehicles

6.Construction equipment

Type	Inside Diameter (inside height*inside width)	outside Diameter (Outside height*outside width)	bending Radius (R)	C	D	Pitch	Remark	Serial number
E3550	35*50(00179)	52*74	75.100.125.150	17.5	43	51	Bridge type,Botton lid can be opened	00189
E3575	35*75(00178)	52*99	75.100.125.150	17.5	68	51		00193
E35100	35*100(00175)	52*124	75.100.125.150	17.5	93	51		00186
E35125	35*125(00176)	52*149	75.100.125.150	17.5	118	51		00188

Material	Rigid PA66
Temperture range	-40 °C~125 °C

MOUNTING VARIATIONS:

Chains placed horizontally

Krius chains,thanks to a large range of models and versions,satify many requirements in variety and combination of motions.On this page the various combinations of mounting are listed.

For further information about realising a personalised projected please contact our technical department.They are at you disposal to resolve any specific problems you may have and can design according to your particular request.

Chain placed Vertically

Krius chains also provide answers to problems concering vertical motion.Due to their particular design krius cable chain can also be used in applications with extremely long travel distances.

The chain length (L) is calculated by summarising the half stroke LA/2 the nominal value (b) of the bending radius and the distance (DPJ) from fixed piont to centre of total stroke.

The value is then rounded up the multiply of the chain pitch for nylon cable chains and to an odd multiply for steel chains.

Long Horizontal Travel Distance

Cable chains are used more frequently on long travel distance as a valid altermative to the traditional systems of conductor bars or to festoon systems,and offer the following advantages:

1.the possibility of the combined transportation of hydraulic cables/tubes.

2.the possibility of use also in critical environments (humidity,textile dust,negative chemical and atmospheric components etc.)

3.High velocities and values of acceleration.

4.Notably shorter installation times.

5.Drastic reduction in the time taken for maintenance.