Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Drying Oven

The band baking oven will offer the auto drying or dehydration for the chemical product.The working temperature is 50-165 degree - details see: https://www.machineto.com/drying-oven-for-chemical-10289060

1. The application and principle of the band baking oven

1.1. The band baking oven is one kind of auto equipment for baking the material and removing the humidity from it.

It is one part of the automatic molecular sieve production line, and it can transport the material to the rotary furnace.

This equipment can be also used in food, medicine, chemical material and so on of dehydrating.

1.2. 1.2. The principle of the band baking oven is heating the air, and uses the flow engines to flow the hot air

through the material, and the water of the material and cool air will be removed by the exhaust fan. The material is

transmitted

by the moving band that inside of the oven. The wet material comes in and the dry material goes out from the other

head.

2. The accessories and parts of the band baking oven

It is included one material filter, 10 pieces electrical heater ways, one set humidity remove flow fan, five sets of heat

cycle flow parts, one piece of stainless steel sieve band and two material handcarts and two sets of material lift

systems.

3. The information and specifications of the band baking oven

3.1 The total length of the band baking oven is 12000mm, total width is 2320mm, the total height is 1340 mm, and

the band width is 1640mm.

3.2 The band is made by 304 stainless steel, and other parts are made by common steel.

3.3 The total power is 200KW, the blower power is 14KW, 50HZ, 220 or 380V. Or we can offer the gas or heat oil heating.

3.4 The working temperature is 50-165°C.

3.5 The bed thickness is 3-15mm.

3.6 There are five flow units to make up the equipment.

3.7. The length of drying unit is 10000mm.