Home  >  Farm Machinery  >  Farm Machinery  >  Feed Processing Machines

fish feed making machine, 1.single screw extruder fish feed machine, 2.making floating and sinking feed, 3.feed size 0.9-15mm - details see: https://www.machineto.com/dry-extruder-fish-feed-machine-floating-fish-pellet-machine-0086-13838347135-10184377

Floating fish feed making machine

Feeding your fish by floating fish feed!

Floating Fish Feed Machine Introduction

Floating fish feed machine is widely used for producing grains into high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc. The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours. According to your requirement and production scale, floating fish feed machine can be classified into dry type machine and wet type machine.

Floating Fish Feed Machine Working process

After the material is sent into feeding device, they will be pressed by the screw shaft with high pressure and temperature which makes the raw material fully cooked and sterilized. Then the pressed material will be formed into pellets by shaping mould. You can change different moulds to make pellets with different diameters. After that a cutting device will cut the formed pellets into different length as required.

Floating Fish Feed Machine Application and features

1.According to different requirements, variety shapes of high-grade feed pellets for fish, shrimps .etc can be produced.

2.The finished pellets can keep floating for 3-15 hours without pollution to water.

3.The floating time can be controlled by the puffing degree adjustment.

4.Floating fish feed machine can make pellet from dia.1.0mm-20mm just by changing the mold.

5.Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.

6.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.

7.The cutting device can be adjusted to make pellets of different length.

8.The wet type machine needs a boiler to make steam which can conduct steam to the conditioner and ripen the raw material in advance.

Dry type specification:

Model	Capacity(kg/h)	Power(kw)	Screw diameter(mm)	Cutting powder(kw)
AMS-DGP60S	120-150	15	60	0.5
AMS-DGP70S	180-250	18.5	70	0.75
AMS-DGP80S	250-400	22	80	0.75
AMS-DGP90S	400-500	30/37	90	1.1
AMS-DGP120S	500-700	55	120	1.1
AMS-DGP135S	800-1000	75	133	1.5
AMS-DGP160S	1500-1700	90	155	2.2
AMS-DGP200S	1800-2000	132	200	2.5

Packing and delivery photos