drop former

dropformer handling sulphur granule, wax granule, resin granule and other low melt point material granule, form halfround partic - details see: https://www.machineto.com/drop-former-10199282

Place of Origin:Jiangsu China (Mainland)	Brand Name:SUNUP	Model Number:CF	belt width:0.5m/0.6m/1.0m/1.2m/1.5m
cooling area:2-51.6 square meter	shape of product:half round or flake

Dropformer features:
1) Working principle:
Molten material flows from upstream processing via a steel belt
moving at a uniform velocity. The upward spray cooling and water
returning device is provided below the belt to ensure that the
molten material spread uniformly on the belt may be cooled and
cured in the course of being conveyed to the discharge end. On the
basis of the properties of the material and requirements for use,
different operating modes and mechanisms for intermittent dropping,
continuous bar output or full-width overflow may be selected for
the material distributing device so as to yield hemisphere, strip
or flake shaped products.
2) Applied scope:
The plant is applied to products with a melting point below 250^oC for curing and shaping.
3) Typical applied materials include: sulphur, paraffin wax, resin, asphalt, maleic anhydride, trimellitic anhydride, salt stearate, hot-melt adhesives, m-phenylenediametermine, urea, rubber and plastic auxiliary.
Inner packing: Wooden case
Outer packing: Container