Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Crusher

Progressive for crusher, 1.BV and TUV certification passed;, 2.ISO9001 certification; - details see: https://www.machineto.com/djf-2000-progressive-for-crusher-10310683

DJF-2000 progressive for crusher

DJF2000 series distributors suit for high ambient temperature. With manual lubricator, motorized lubricator and pneumatic

lubricator can form single line lubrication system. Widely be used in large machine tool andharbor machines.

A typical DJF2000 distributor consist of a inlet section, a end section and no less than 3 sections and no more than 10

sections. A distributor can have 3 to 20 outlets. Twice outlet section (Add “T” after section specification means twice outlet

section) have two outlets at both side of the section.

Single outlet section (Add “S” after section specification means single outlet section) have an outlet at one side of the section.

Please pay attention that you can block any out otherwise the progressive distributor can not work.

progressive for crusher

Technical

Max work pressure:25MPa

Delivery:0.16ml/cyc ~ 1.12ml/cyc

Lubricant viscosity (under standard temperature) : oil ≥ N68, grease: NLGI 000#~2#

Work temperature: -20°C~+60°C

Max work frequency (with stem): 60cyc/mim

Max work frequency (without stem): 200cyc/min

Manifold number: 3~10

Tubing: Outlet: Φ6mm length: 1.2~3.5m

Inlet: Φ8mm length:1.5~4.5m

Manifold Material: carbon steel

DJF-2000 Progressive for Crusher Dimension

Number Of Working Slice	A (mm)	B (mm)	Number Of Working Slice	A (mm)	B (mm)
3	89.4	143.0	7	171.8	223.0
4	110.0	163.0	8	192.4	244.0
5	130.6	183.0	9	213.0	264.0
6	151.2	203.0	10	233.6	284.0

DJF-2000 Progressive for CrusherSpecification

No	Valve Size	Discharge	P.N.	Max Pressure	Min Working Pressure	Inlet Screw	Inlet Pipe	Outlet Screw	Outlet Pipe	Outlet per Slice
		ml/cyc		MPa
1	2000-10T	0.16	20720-10T	25	1.4	M12 ×1.5	Φ8	M10×1	Φ6	2
	2000-10S	0.32	20720-10S							1
2	2000-15T	0.24	20720-15T							2
	2000-15S	0.48	20720-15S							1
3	2000-20T	0.32	20720-20T							2
	2000-20S	0.64	20720-20S							1
4	2000-25T	0.40	20720-25T							2
	2000-25S	0.80	20720-25S							1
5	2000-30T	0.48	20720-30T							2
	2000-30S	0.96	20720-30S							1
6	2000-35T	0.56	20720-35T							2
	2000-35S	1.12	20720-35S							1

DJF-2000 Progressive for CrusherSpecification

Notes:

1. Suitable for oil of above N68 viscosity and grease of penetration not lower than 265 (250C, 150g) l/10mm;

2. Cycle indicator can be mounted on 20T or 20S sections;

3. User shall specify changed inlet/outlet dia. when ordering;

4. Never block outlet of a distributor so as to avoid over pressure damage to the distributor;

5. See "Accessories of distributors---crossing port" for crossing port selection;

6. Smallest segments group shall have 3 sections; largest segments group shall have 10 sections.

Progressive for Crusher

Progressive for Crusher

Progressive for CrusherProgressive for Crusher