Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

It is mainly used for heating, cooling, evaporation, condensation, disinfection, heat recovery and other occasions. - details see: https://www.machineto.com/dismountable-plate-heat-exchanger-10241571

Dismountable Plate Heat Exchanger

Efficient heat transfer from the plate heat exchanger corrugated sheets and framework. Clamping plates fixed by the bolts and activities of the pressing plate is pressed between the plates, the heat exchanger to form a number of internal flow channel, between the board and the board with a rubber seal. Pressed board has external connection of the equipment and receiver. Plate with high quality corrosion-resistant sheet metal pressed, washed with four corners and out of the corner holes for the media up and down a hanging hole. Chevron corrugated to increase the disturbance of the fluid, the fluid turbulence at low speed to achieve status, to obtain high heat transfer effects. And the use of special structure to ensure the two fluids will not leak string.

1. Energy efficient: the heat transfer coefficient in the 3000 ~ 4500kcal/ m² ·°c · h, shell and tube heat exchanger than the thermal efficiency 3 to 5 times.
2. Compact structure: plate heat exchanger plate tightly, as compared with other types of heat exchangers, plate heat exchanger area and space less the same size of plate heat exchangers for heat only shell Heat exchanger 1 / 5.
3. Easy to clean easy accessibility: plate heat exchanger by clamping bolts clamping piece clamping plate board, therefore, easy accessibility, ready to open the cleaning, while the board clean, highly turbulent and difficult to scale.
4. Long service life: plate heat exchanger of stainless steel or titanium plate pressing, can be resistant to various corrosive media, pads can easily replace, and may facilitate the disassembly and maintenance.
5. Adaptability: plate heat exchanger plate as a separate component, can be freely change process, in various forms; applicable to a variety of different process requirements.
6. No strings fluid, plate heat exchanger liquid seal groove set the discharge channel, a variety of media, not collusion, even if there is leakage, the media is always out discharge.

Plate Sheet Type	BR0.05	BR0.1	BR0.2	BR0.3	BR0.5
Plate Sheet Material	SS304 or SS316
Single Heat Exchange Area(m²)	0.05	0.1	0.2	0.3	0.5
Plate Sheet Size(mm)	500*168	660*250	970*330	365*1183	450*1451
Plate Sheet Thickness(mm)	0.7	0.7	0.7	0.7	0.7
Angle Hole Diameter(mm)	38	60	75	85	110
Connect Pipe Diameter(mm)	28	38	46	90	116
Corrugation Form	"Y" type
Corrugation Space Between(mm)	10	12	12	14	16
Average Plate Space Between(mm)	3.8	3.8	3.8	4.5	4.5
Combined Heat Exchange Area(m²)	0.5~3	3~10	8~38	30~50	40~80
Max. Pressure (Mpa)	0.4~2
Max. temperature (°c)	Common:120-160 Especial:250
Heat Transfer Coefficient(w/ m² °c)	2000-6000