Home  >  Industrial Supplies  >  Air Cleaning Equipment  >  Industrial Dehumidifier

1.Dehumidifier capacity:4.2L/hr, 2.Energy saving dehumidifier., 3.Plastic cabinet dehumidifier, 4.Easy installation - details see: https://www.machineto.com/designer-and-manufacturer-of-heat-pump-dehumidifiers-10205713

Alto Designer and manufacturer of heat pump dehumidifiers

Why use Dehumidifier

Dry air is a laboratory phenomenon. Atmospheric air will always contain moisture, often in quantities that can cause problems to materials, manufacturing processes and create human discomfort. Spaces containing high airborne moisture content (humidity) will suffer from damp, condensation and unpleasant odours. Traditionally the problem was disguised by the use of heat or ventilation. This process is exceptionally energy inefficient and reliant on introducing outside air that is generally not suitable unless expensively heated.

By comparison, Alto dehumidifiers recirculate the internal air and positively, in a controllable, efficient manner remove moisture from it. In doing so, the humidity can be controlled without the need for heat. Further, outside air conditions have little effect on the dehumidification efficiency.

INSTALLATION

How Alto Pool & Spa Dehumidifier Works

Alto dehumidifier uses the refrigeration circuit for dehumidification. When the damp air passes the evaporator,the water vapor is condensed, then the air is heated as it passes through the condenser.

Environmentally Friend Refrigerant

Alto dehumidifier uses R407c and R410a refirgerant, both high thermodynamic performance coolants that are environmentally friendly and totally harmless to the ozone layer. These coolants

are in accordance with the Montreal protocol and wil not harm the environment.

Alto Pool & Spa Dehumidifier Features

1. Auto intelligent control & heating function dehumidifie

2. Supper quiet & efficient dehumidifier

3. Dehumidifier is supplied complete with 3 installation

Kitswall mount, Floor mount & Wheel mount

4. Auto-defrosting & Self-diagnosis function dehumidifier.

5. VLED color dynamic display screens for each dehumidifier.

6. Added with two kinds of back-up air heating parts for the dehumidifier: LPHW & electric

heater.

Alto Pool & Spa Dehumidifier Parameters

Specification	D-042
Capacity (l/d)	100
Heating Capacity (w)	2200
Consume Power (w)	1250
Air Flow (m3/h)	500
Power Supply (V/Ph/Hz)	230/1/50
Drain Pipe (mm)	8
Noise 1.5m (dBa)	48
Dimension (cm)	89x26x76
Weight (kg)	65

* Under the following nominal conditions: air 30^oC hygrometry 80%

* All specification for the industrial dehumidifier is subject to change without notice

More pictures

Humanity Control: Easy setting interface, Remote controller can command unit in 15m

Service for

Alto Refrigeration Manufacturing Co.,Ltd,is an professional factory who manufacturingheat pump,dehumidifier ,chiller and ventilatorsfor more than ten years.All products have been

exported to France,Spain,Italy,United Kingdom,Sweden,Norway,Ukraine and Australia.