Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Crusher

Best Steel: From An Steel, Bao Steel etc., Wearing Parts: Hard Alloy, Motor: Siemens, Word Wide Used - details see: https://www.machineto.com/crusher-10310864

CNBM, the largest state-owned building Materials Company in China, which belongs to China State Council. CNBM is:

• Total assets of 30Billion US Dollars
• 12 National first Class Research and design institute
• 6 National Technology Center and Laboratory
• 8 Provincial and Industrial Technology Center
• 8 Standards and Technology Committee
• 30 national and industrial quality inspection, test and certification center

CNBM Jaw Crusher

lWorking Principle

The motor drives pulley, making the movable Jaw do periodic movement through eccentric shaft. The angle between toggle plate and movable jaw increases when the movable jaw moves up. So the movable jaw closes to the fixed jaw. The stone is crushed in this process.

Model	FeedOpeningSize (mm)	Max.Feed Size(mm)	Capacityt/h	Weight(t)	Overall Dimension(L*W*H) (mm)	MotorPower(KW)
PE-150*250	150*250	125	1-3	0.6	720*660*850	5.5
PE-200*300	200*300	180	2-6	1	910*750*990	7.5
PE-200*350	200*350	180	3-10	1.3	1000*870*990	11
PE-250*400	250*400	210	5-20	2.8	1300*1090*1270	15
PE-400*600	400*600	340	16-60	7	1730*1730*1630	30
PE-500*750	500*750	425	40-110	12	1980*2080*1870	55
PE-600*900	600*900	500	60-200	20	2290*2290*2400	75
PE-750*1060	750*1060	630	115-330	29	2660*2430*2800	110
PE-870*1060	870*1060	660	290-336	31.5	2810*2430*2800	110
PE-900*1060	900*1060	685	160-400	33	2870*2420*2940	110
PE-900*1200	900*1200	750	220-450	52	3380*2870*3330	110
PE-1000*1200	1000*1200	850	315-500	55	3480*2876*3330	110
PE-1200*1500	1200*1500	1020	400-800	100.9	4200*3300*3500	160

CNBM Impact Crusher

lWorking Principle

When the impact crusher works, the motor drives the rotor rotate at a high speed, on the rotor where the blow bar installed. When the materials goes into the area which the blow bar effects, under the impact function of the below bar at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the blow bar effects for being crushed again. The materials from large to small all to be crushed in the impact chamber repeatedly. The process won’t stop until the materials are crushed to the required size and then discharged from outlet.

Model	Specification(mm)	Feed Size(mm)	Capacity(t/h)	Power(Kw)	Weight(t)	Dimension(L*W*H)(mm)
PF-1007	Φ1000*700	400*730	30-70	45	12	2330*1660*2300
PF-1010	Φ1000*1050	400*1080	50-90	55	15	2370*1700*2390
PF-1210	Φ1250*1050	400*1080	70-130	110	17.7	2680*2160*2800
PF-1214	Φ1250*1400	400*1430	100-180	132	22.4	2650*2460*2800
PF-1315	Φ1320*1500	860*1520	130-250	220	27	3180*2720*2620

CNBM Cone Crusher

Working parts of spring cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. The spring release system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber but not damage the crusher. The release system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product.

Model	Max.Input(mm)	Capacity(t/h)	Motor Power(Kw)	Weight(t)	Dimension(L*w*H)(mm)
PYB 900	115	50-90	55	10.2	3050*1640*2350
PYZ 900	60	20-65		10.2
PYD 900	40	15-50		10.3
PYB 1200	145	110-200	110	24.7	4152*2300*2980
PYZ 1200	100	50-150		25
PYD 1200	50	18-105		25.6
PYB 1750	215	280-480	160	50.3	4870*3800*4192
PYZ 1750	185	115-320		50.3
PYD 1750	85	75-230		50.4
PYB 2200	300	590-1000	260-280	80	7705*3430*4852
PYZ 2200	230	200-580		80
PYD 2200	100	120-340		81.4