Copper Rod Breakdown Machine

1. Copper rod breakdown machine, 2. State-owned factory, 3. Confirms to all test certifications, 4. Good after-sales services - details see: https://www.machineto.com/copper-rod-breakdown-machine-10366438

Place of Origin:Sichuan China (Mainland)

Brand Name:141

Model Number:LHD-450/13(9)

usage:drawing wire

contact supplier for Copper Rod Breakdown Machine

§Equipment use

The copper rod breakdown machine, wire drawing machine is mainly used for drawing ø1.30-ø4.0mm copper wires from 8mm rod.

§Equipment feature

1. The box body is cast part in whole one which can make perfect outlook and lower noise and vibration.

2. All drawing blocks wheel which have equal diameter and are set in one row in certain degree. The special design can protect the wire against scratching and compressing.

3. The operation is very convenient because of the block wheels in one row and oil immersion lubrication method and horizontal annealer.
4. Dual-motor driving and rapid mould-changing system;
5. High load carrying capacity and low noise;
6. The copper rod breakdown machine,wire drawing machine adopts dual take-up and has high automation.

§Equipment composition

The copper rod breakdown line, wire drawing line is composed of pay off stand, main drawing machine, annealing device, wire accumulator, dual take-up, wire pointer and stripper, electric control system, etc.

§Technical Data

		LHD-450/13	LHD-450/9
Main machine	Inlet Wire dia.	Φ8.0mm	Φ8.0mm
	Out Wire dia.	Φ1.3~4.0mm	Φ2.5-4.0mm
	Max. Linear speed	22m/s	14m/s
	Max. Drawing Pass	13	9
	Finish Capstan Dia.	Φ450mm	Φ450mm
	Speed ratio between capstans	1.41-1.18	1.41-1.18
	Main motor	280kW(DC)	250kW(DC)
	Finish capstan motor	75kW(DC)	55kW(DC)
Continuous annealer	Annealing Wire dia.	Φ1.2~4.0mm	Φ1.2~4.0mm
	Max. annealing speed	20m/s	13.0m/s
	Max. annealing voltage	60V(DC)	60V(DC)
	Max. annealing current	6000A(DC)	6000A(DC)
	Cooling water consumption	20m³/h	20m³/h
	Air consumption	18 m³/h	18 m³/h
Dual take-up	Accumulating wheel length	5.0m	5.0m
	Max. take-up speed	22m/s	22m/s
	Max. traversing pitch	6mm/r	6mm/r
	Take-up motor power	32kW×2(DC)	32kW×2(DC)
	Take-up bobbins	PND500-630(DIN46397)	PND500-630(DIN46397)
Drop down coiler	Take up speed	18m/s	18m/s
	Take-up motor power	18.5kW(AC)	18.5kW(AC)
	Wire range	Φ1.8~3.5mm	Φ1.8~3.5mm
	Coiling wheel dia.	Φ800mm	Φ800mm
	Max. loading weight	1500~1800kg	1500~1800kg
Others	Total weight	50000kg	47000kg
Others	Overall dimension	27500×4400×5000mm	25000×4400×5000mm