Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Briquette Machines

Briquette Press, 1.high pressure,widely applied, 2.good effect of shaping, 3.finished products from 30-60mm, 4.top quality - details see: https://www.machineto.com/coal-manganese-briquettes-press-machine-hydraulic-pressure-10309812

Carbon Powder Briquettes Making Machine(Hydraulic Pressure)

1.Company Introduction

We areZhengzhou Zhongzhou Briquette Machinery Plantthat a manufacturer and exporter ofmining machinery, metallurgical equipment and building materialsin China. Our main products are coalcrusher, mixer, rotary dryer, briquetting machine,briquettes dryer and so on. All of them are ISO9001:2008 confirmed. They are excellent quality and enjoy good reputation both in China and overseas. Welcome to visit and purchase from us!

2.Usage of Hydraulic Briquetting Machinebriquettes making machine

It is widely used inmining industry,metallurgy and chemical industryto press difficult molding powder materials such ascoal , iron , sludge, slag , gypsum, tailings , kaolin , activated carbon, coke powderand other ends.

flow chart of coal briquette machine

This series of machine requirements for materials:

1,The material granularity should be controlled in the particles should be less than 1mm at 30-40%; 1mm to 2 mm; particles should be in the 30-40%; the maximum particle size should be less than 3mm of the particles should be at about 10%.

2,The moisture should be controlled within 8-15%. (How much of the water into a ball the greatest impact, a little more a little less big difference, absolutely ensure uniform moisture, special attention should be)

3,The materials must not be allowed to have a piece of iron or other high hardness massive debris, so as not to damage the forming roller and the shaft, the use of the department should be in the installation of iron removal part of the process from the preparation.

4,Binder and other additives ( such as sulfur removal agent ) users according to coal and its use in environmental self prepared ( also available through consultation by the supplier )

3.Main Technical Parameter

Model: ZZXM-8

Power: 15~18.5kw

Capacity:6t/h 25thousand t/year

Overall size: 1400x1298x2125mm

Weight: 2.75t

Roller width/diameter: 220mm/450mm

Total pressure:30t

rotary speed of main spindle: 15r/min

line pressure of roll face: 0.6

pressure stype: Wedge papilionaceous spring stype

Roller materails: 65Mn 9Cr2Mo wear-resistant alloy

Heat treatment: 52~58°C

Structural form: Two rollers and single pressure/Four rollers double pressure

Ball shape: round, pillow-shaped, oblate, oval-shaped,diamond

Ball size:30~60mm

4. Pictures Show: