CNI DPSS Yellow Green Laser at 561nm / MGL-FN-561 / 1~200mW
1.Ultra compact, 2.Long lifetime, 3.Low cost, 4.High stability - details see: https://www.machineto.com/cni-dpss-yellow-green-laser-at-561nm-mgl-fn-561-1-200mw-10231618
Place of Origin:Jilin China (Mainland) | Brand Name:CNI | Model Number:MGL-FN-561 | Wavelength:561nm |
Output power:1-200mW | Size:standard |
APPLICATION:
It is used in scientific experiment, optical sensor, measurement, instrument, communication, spectrum analysis, etc
SPECIFICATIONS:
Wavelength (nm) | 561±1 | |
Output power (mW) | >1, 5, 10, 20, … , 200 | |
Transverse mode | TEM00 | |
Operating mode | CW | |
Power stability (rms, over 4 hours) | <1%, <3%, <5% | |
Warm-up time (minutes) | <10 | |
M2factor | <1. 2 | |
Beam divergence, full angle (mrad) | <1. 5 | |
Beam diameter at the aperture (mm) | ~2. 0 | |
Beam height from base plate (mm) | 27.4 | |
Polarization ratio | >100:1 (0 or 90 degree) | |
Pointing stability after warm-up (mrad) | <0.05 | |
Operating temperature(°C) | 10~35 | |
Power supply (90-264VAC or 5VDC) | PSU-H-LED | PSU-H-FDA |
Modulation option | TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option | |
Expected lifetime (hours) | 10000 | |
Warranty | 1 year | |
Note | The laser head need to be used on a heat sink with good heat dissipation. |
Packaging Detail:vaccum anti-static |
Delivery Detail:1-2 Weeks |