cnc servomotor and driver kit

Servo Driver and Servo Motor, 1' Precise digital control on torque, speed, position, 2' 220VAC, 3' Global after-sales service - details see: https://www.machineto.com/cnc-servomotor-and-driver-kit-10234632
Place of Origin:Hubei China (Mainland)Brand Name:MaxsineModel Number:EP100-2A & 80MSL02430FMotor Type:AC Motor
Servo driver output power::3-phase 220VACServo driver rated output current::1A-24AServo driver protection Level:IP20Regenerative Braking:Built-in/built-out
Certification:ISOMatch Motor model:Servo Motor 80MSL02430F  
cnc servomotor and driver kit
contact supplier for cnc servomotor and driver kit


Product Introduction

1'Servo driver models

EP100-2A,EP100B-2A,EP100-3A,EP100B-3A,EP100-5A

EP100 series AC Servo Driver is the earliest series promoted into the market with high performance, intelligentization, high reliability and highgrade digital ac servo system of small volume. This series adopts specialized DSP (Digital Signal Processor), IPM (Intelligent Power Module), and advanced control algorithm, which could realize precise digital control on torque, speed and position. The selected exquisite operation panel could do the realtime monitor and adjust the operating situation of motors.

2'Introduction of EP100 series models

3'Introduction of EP100 Size

4'Introduction of EP100 Specification

ModelEP100(B)-2AEP100(B)-3AEP100-5A
Input Power3-phase AC220V -15% ~ +10% 50/60Hz
EnvironmentTemperatureWorking:0°C~ 40°C Storing:-40°C~50°C
Humidity40% ~80%(non condensing ) Storing:under 93%(non condensing )
Atmospheric Pressure86kPa ~ 106 kPa
Protection LevelIP20
Regenerative BrakingBuilt-in
Control ModeEP100 seriesPosition,Speed, Torque
EP100B seriesPosition
Digital Input1.SRV-ON 2.A-CLR 3.CCW Drive Inhibition 4.CW Drive Inhibition
5.Deviation CL/Speed Selection 1/ ZEROSPD 6.Instructions Pulse Inhibition/Speed Selection2
7.CCW Torque Limitation 8.CW Torque Limitation
Digital Output1.Servo Ready Output 2.Servo Alarm Output 3.Finish Orientation Output/Reach Speed Output
4.Mechanical Brake Output
PositionInput ModePulse+Signal, CCW Pulse/CW Pulse,Two-phase A/ orthogonal Pulse
Electronic Gear Ratio1~32767/1~32767
Feedback Pulse2500 Line/turn
TorqueAnalog Instructions Input-10V ~ +10V,Input Impedance10kΩ
Rate LimitationParameter Setting
Instructions SourceAnalog,Internal Torque Instructions
Speed4 kinds Internal Speed/Analog Control
Acceleration and Deceleration FunctionParameter Setting 1~10000ms
Surveillance FunctionRevolving Speed,Current Position,Instructions Pulse Accumulation,Positional Deviation,Motor Torque,Motor Current,Straight-line Speed,Rotor Absolute Position,Instructions Pulse Frequency,Running State,Input and Output Terminal Signals etc.
Protection FunctionOverspeed,Overvoltage, Undervoltage,Overcurrent,Overload,Abnormal Brake of main Power,Abnormal Encoder,Abnormal Control Power Supply,out of tolerance etc.
FeatureSpeed Frequency Response≥250Hz
Speed Fluctuation Rate<±0.03%(Load 0 ~ 100%); <±0.02%(Power -15% +10%)(parameters agree with rated speed)
Speed Ratio3.513889

5'Introduction of servo motor 80MSL02430F

ModelServo Motor 80MSL02430F
Rated Power750w
Rated Line Voltage3 phase 220VAC
Rated Line Current3.0A
Rated Speed3000rpm
Rated Torque2.39Nm
Peak Torque7.1Nm
Rotor Inertia2.4*10-4kg·m2
Lines of Encoder2500ppr
Motor Insulation ClassClassB(130°C)
Protection LevelIP65
Operating EnvironmentTemperature: -20°C ~ +50°C;
humidity: relative humidity (RH)<90%
(not including condensing condition)

6'Matching scheme for EP100

More pictures for our products and company

About us

Packing

After inspection the goods are packed in plastic bags and then carefully packed in cartons.

cnc servomotor and driver kit
Packaging Detail:Foam+Plastic bag+Carton,standard export special packaging
Delivery Detail:5~60 days depend on customers' demand

Related Product for cnc servomotor and driver kit