Home  >  Industrial Supplies  >  Motors  >  Stepper Motor

CNC 85BYG 2 phase hybrid 1.8 degree stepper motor with driver, 1) shaft diameter: 12.7mm, 2) current: 4.2A, 3) 4 leads wires, CE - details see: https://www.machineto.com/cnc-85byg-2-phase-hybrid-1-8-degree-stepper-motor-with-driver-10238967

CNC 85BYG 2 phase hybrid 1.8 degree stepper motor with driver is the brushless,
synchronous electris motor that can divide a full rotation into a large number of steps.

The motor's position can be controlled precisely, without any feedback mechanism.

Detail specification

Model	FHB86-118
Step Angle(°)	1.8
Length L(mm)	118
Holding torque(N.m)	8.5
Current (A/phase)	4.2
Resistance(Ω)	1.2
Inductance (mH)	6.0
Rotor inertia (g.cm2)	2700
Weight (kg)	3.8
Step accuracy	5%
Temperature	80°C Max
Environmental temperature	-20°C~ +50°C
Insulation resistance	100MΩ Min 500 V DC
Withstand voltage	500V AC 1minute

1, High performance, low price

2, Provides 16 kinds microstep selection, upmost microstep can be set to 200x.

3, Special circuit design,reduce noise, enhance steadiness.

4, The upmost pulse response frequence amounts to 200Kpps

5, Once the pulse stops for 100ms, phase current automatically cut by half.

6, Bipolar constant current chopper control

7, Photocoupler isolated input/output

8, Adjustable drive current range from 2.0A/phase-6.0A/phase

9, Single power input, voltage range from DC24 ~80 / AC18-60V

10, Protection circuit

Overheat protection

Overcurrent, under voltage protection

11, Dimension:151x107x48mm, Net Weight:0.5kg.

Please contact with us for more detailed technical information.

We can design according to clients' requirement.