Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Hoists

HSC Chain Block, Strong figure and fine appearance, Excellent performance, Safety operation, Capacity: 1~5t - details see: https://www.machineto.com/chain-block-lifting-equipment-10097050

Chain block lifting equipment

Description:

HS-C Series chain block is inproved on the base of HS-Z series, after absorbing the advanced technology in the world. Besides the tranditional charactristic of HS-Z series chain block, it works with less hand-pull force, and high safety, beautiful appearance and wide applicability.

In order to meet to the different request if differebt customers, we provide different color and different packing of this new type.The outside shell, hook and chains are all in best quality material; never cross mixed in chain, light safety ensure your confident selection.

Detailed specifiation:

Model		HS-C0.5	HS-C1	HS-C1.5	HS-C2	HS-C3	HS-C5	HS-C10	HS-C20
Capacity(t)		0.5	1	1.5	2	3	5	10	20
Standard lift(m)		2.5	2.5	2.5	2.5	3	3	3	3
Running test load		0.75	1.5	2.25	3	4.5	8.25	12.5	25
Headroom Hmin(mm)		240	270	347	380	470	600	700	1000
Effort required to life max.load(N)		221	304	343	314	343	381	392	392
No. of colums ofload chain		1	1	1	2	2	2	4	8
Load chain dia.(mm)		6	6	8	6	8	10	10	10
Dimensions (mm)	A	120	142	178	142	178	210	358	580
	B	108	122	139	122	139	162	162	189
	C	24	28	34	34	38	48	64	82
	D	120	142	178	142	178	210	210	210
Net Weight (kg)		8	10	16	14	24	36	68	155
Gross wight (kg)		10	13	20	17	28	45	83	193
Packing measurements (LxWxK cm)		28x21x17	30x24x18	34x29x20	33x28x19	38x33x20	45x39x24	55x51x29	70x46x75
Extra weight per meter or extra lift (kg)		1.7	1.7	2.3	2.5	3.7	5.3	9.7	19.4

Remarks: inaddition the standard lift we accept orders to 12 lift.

Case in use

1. The load chain must always mesh correctly with the load sheave. With multi fall chain blocks twists can arise by turning over the bottom hook through the load chain.

2. Regularly lubricate the whole length of the load chain with machine or gear oil but be careful not to over lubricate as oil or grease on the brake discs can cause the brake
to malfunction and slip.

3. Confirm that the brake is functioning properly by hoisting the load 100mm and check the brake when lowering the load.

4. Non-vertical (sideways pulling) of the hand chain is not recommended on our chain blocks.

5. The hand chain is equipped with a safety link. When the safety link opens or deforms, stop at once and inspect for the cause.

6. Confirm that the monorail beam or structure supporting the chain block is of sufficient strength to support the load to be lifted.

7. Never lift loads in excess of the WLL of the chain block.

8. Never walk or work under a hoisted load and never lift, support or transport people.

9. Use chain blocks manually only.

10. Do not permit more than one operator to pull on the hand chain at one time.

11. Lift loads correctly with proper slings and attachments. Never lift with the point of the hook and never use the load chain as a sling by back hooking.

12. Lifting a load with two chain blocks is not recommended. If the operation is unavoidable, hoist the load with utmost care, keeping the load balanced.

13. Never run the load chain out too far. When operated beyond the range of lift, an excessive load that can cause damage will be imposed on the chain block.

14. Chain blocks are designed for lifting loads vertically and should not be used for horizontal or angle hoisting.

15. Extreme temperatures will reduce the durability of the hoist. Loads should be hoisted or lowered very slowly and carefully in extreme temperatures.

16. Never leave a load hanging on the hoist.

17. Never use the chain or hook as a ground for welding.

Product:

-Any doubt Please contacto to us.