Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Conveyors

1.Material: Q235A and Rubber belt., 2.Low carbon, environmental, Performance., 3.Small order accepted. - details see: https://www.machineto.com/cement-production-site-using-stable-structure-belt-conveyor-10197310

Cement production site using stable structure belt conveyor

Classification of Stable performance mining rubber

Conveyor can be horizontal, tilt and vertical transmission, but also the composition of space transmission lines, transmission lines are generally fixed. Conveyor transport capacity, long-distance, but also in the transportation process while completing a number of process operation, it is widely used. Main belt conveyor, plate conveyor, screw conveyor, bucket conveyor, bucket elevator, overhead conveyors and so on.

Details of the rubber belt conveyor machinery

• Used range:Rubber belt conveyor used in coal, mine, metallurgy,power plant, harbon, cement, chemical industry.
• Belt width:0.8m/s, 1.0m/s, 1.25m/s, 1.6m/s, 2.0m/s, 2.5m/s, .15m/s, 4.0m/s,5.0m/s.
• Advantages: Large volume capability, cheap, convenient tomaintain.
• Used environment temperature:From -25°c to 40°c.
• Special need:as the buyer's demand.

belt conveyor machinery idler rollers

1. Trough idler roller:35° and 45°.
2. Note: We usually use 35° trough idler.
3. Rollers:Light, middle, heavytypes.Φ 500~1000mm.Diameters of the bearing changable.
4. Purface of the rollers:Smooth, Rubber coated.
5. Painting: At least5 times paintings.Absolutlyrust-resistant.
6. Mterials:Carbon steel, Q235. Rubber belt.
7. Belt materials(4 kinds):Canvus(56N/mm.layer), nylon(100 to 300N/mm.layer), plastic(100 to 300N/mm.layer), steel wire belt(st630 to st2000N/mm.layer).

Components and spare parts

1. Belt(4 kinds): Canvus, nylon, steel wire, plastic belt.

2. Driving part(electronic motor,high speed coupling,speed reducer, low speed coupling, and all of the devices can be installed on a fixing bearing. Or usingan electronic roller as a driving device.)

3.Roller parts(Driving rollersandreturning rollers)

4.Idler rollers parts(Troughidler rollers,parallelidler rollers,adjusting coreidler rollers, andimpactidler rollers , etc.)

5. Intensity device:At the and of the belt to keep the belt work smoothly.

6.unloading device(Fixed plow unloading deviceandelectronic unloadingvehicle)

7.Cleaning device(Elastic cleaning devicein the front part, andempty segment cleaning devicein the middle.)

8.Brake device(Roller stopping device,Belt stopping device)

9.Accessories(covering, inverted trough, a funneland so on)

Technical parameters of Stable performance mining rubber/PVC belt conveyor