CD1 type wire rope electric hoist with electric trolley

CD1 type wire rope electric hoist:, 1.Capacity: 0.5t-32t electric hoist, 2.Lifting height: 6m-30m, 3.Voltage:380v, 50Hz, 3 phase - details see: https://www.machineto.com/cd1-type-wire-rope-electric-hoist-with-electric-trolley-10097175
Condition:NewPlace of Origin:Henan China (Mainland)Brand Name:XinfengModel Number:CD1
Usage:Construction Hoist,Used for sing beam, bridge and gantry cranePower Source:ElectricSling Type:Wire RopeMaximum Lifting Weight:32 ton
Maximum Lifting Height:30 meterLift Speed:8m/min, 8m/0.8minCertification:ISO certificate, quality certificateWarranty:12 month
After-sales Service Provided:Engineers available to service machinery overseasStandard:JB/T9008.1-2004Power:Three-phase AC 380V 50HzType:CD1 type electric hoist, MD1 type electric hoist
Working system:Intermediate FC=25%Overload control:Emergency limiting stopperTravelling speed:20m/min or 30m/minProduct name:CD1 type wire rope electric hoist with electric trolley
Control methods:Remote control or hand button control   
CD1 type wire rope electric hoist with electric trolley
contact supplier for CD1 type wire rope electric hoist with electric trolley


CD1 type wire rope electric hoist:

Model CD1 and MD1 wire rope electric hoist is a small-sized lifting equipment, which is can be mounted on single beam, bridge, gantry and arm cranes. With slight modification, it can also used as a winch. It is widely used in factories, mines, harbors, warehouse, shops, essential in raising working efficiency and improving working conditions.

Model CD1 electric hoist has only one normal speed, which can satisfy normal application. Model MD1 electric hoist provides two speeds, normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tool. Model MD1 electric hoist is more widely than Model CD1.

Details of wire rope electric hoist:

Motor:Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.

Gear Box:Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.

Wire Rope:Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric apparatus controlling system:Model CD1 and MD1 is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Rope Guide:Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.

Hook:The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.

Enquiry information for wire rope electric hoist:

If you are interested in our electric hoist, please let us know the following informations, we will do our utmost to support you throughout the production, quality and shipment.

1. The lifting capacity 2. Lifting height 3. CD1 or MD1 type or low headroom wire rope electric hoist or BCD proof-explosion wire rope electric hoist 4. Industrial voltage 5. Required quantity 6. Special requirement

Website: www.hnzxqz.com.cn Tel: 0086-373-8791276 Mobile: 0086-15294895643 Skype: bioneer88

Technical parameter of wire rope electric hoist:

ModelCD1 type wire rope electric hoist, MD1 type wire rope electric hoist
CapacityTons0.512351016
Hoisting heightM6,9,126,9,12,18,24,309,12,18,24,30
Hoisting speedM/MIN8873.5
Travel speedM/MIN20/3020/3020/3020/3020/3020/3018
WireropeDia.(mm)4.87.41113151517.5
Spec.6x37+FC6x37+FC6x37+FC6x37+FC
Hoisting motorTypeTypeZD121-4ZD122-4ZD131-4ZD132-4ZD141-4ZD151-4ZD151-4
PowerPower(kW)0.81.534.57.51313
Rotation speedRotation speed(r/min)1380138013801380140014001400
Current(A)2.24.37.611183030
Travel motorTypeTypeZDY111-4ZDY111-4ZDY112-4ZDY112-4ZDY121-4ZDY121-4ZDY121-4
PowerPower(kW)0.20.20.40.40.80.8x20.8x2
Rotation speedRotation speed(r/min)1380138013801380138013801380
CurrentCurrent(A)0.720.721.251.252.42.42.4
Power3PAC 220v/230v/380v/400v/415v/440v380V,50HZ/60HZ,

All types of electric hoist:

1. CD1 type wire rope electric hoist;
2. MD1 type wire rope electric hoist;
3. Mini wire rope electric hoist;
4. Gantry crane wire rope electric hoist;
5. Low headroom electric hoist;

6. BCD explosion-proof electric hoist

7. 110V wire rope electric hoist

8. Wire Rope electric winch

CD1 type wire rope electric hoist with electric trolley
Packaging Detail:plywood case with plastic bag
Delivery Detail:7-30 days after receipt of your advanced payment

Related Product for CD1 type wire rope electric hoist with electric trolley