Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Hoists

1.Capacity:0.5t-32t, 2.Height: 3m-100m, 3.Manufacturer, 4.Waranty:24 months, 5.CE, GS & ISO9001, insured by PICC. - details see: https://www.machineto.com/cd1-hoist-electric-10096706

CD1/MD1 Electric hoist Introduction:

Type CD1 (MD1), wire-rope electric hoist is a kind of small-lifting equipment, it can be mounted on single beam overhead crane, gantry cranes, jib type CD1 (MD1). Electric hoist as only one normal speed which can satisfy normal application. It is widely used in factories, mines, harbours, warehouses, cargo storage area and shops, essentially in raising working efficiency and improving working conditions.

1. CD1 and MD1 series of steel rope electric hoist are improved ones on the basis of the original CD and MD .

2. Tight structure ,smart body,safety and reliability ,commom

used parts,strong lifting capacity, easy maintance.

3. The hoists exists in form of stationary style and crab-style.

4. The products are widely at industrial ore enterprises ,railway,harbors,warehouses and materials sites etc.

5. Working environment:no fire,no explosive danger ,no corrosive media and no dirt exist.

6. Working temperature:-25°C~+40°C ,Wetness is less than 85%.

Motor	Hoist Motor is a taper type rotor motor with braking; it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box	Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope	Hoisting rope comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum	Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system	Model CD1 or MD1 is composed of the contactor box, controlling switch, cut-off limiter. The working voltage of controlling switch is 380V, 36V or 24V (safety voltage).
Rope Guide	Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thicken and dilated, so that it is not easy to be damaged.
Hook	The hook block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing. The pulley is thicken and dilated than domestic common

7. 380v/50Hz/3Phases

8. Mainly consists 3 parts:lifting mechanism ,traveling mechanism and electrical equipment

9. With slight modification, it also can be use as a which.

10. Electric wire rope Hoist is assembled by several parts:

CD1/MD1--Electric hoist Parameters:

High quality material:

1.Electrical equipment:Schneider Control box material:Q235B
2.Motor:Nanjing special electric
3.Bearing:Ha‘erbin Bearing
4.Gear:20Chromium manganese titanium
5.Hook:40 chrimium forge
6.Wire rope:Guizhou Julong limited liability company
7.Transmission shaft:45#quenched and tempered steel
8.Cover and coiling block:thicken steel plate

Hoists Enquiry information need:

1. Capacity

2. Lifting height

3. Lifting speed and running speed requirement.

4. Power supply

5. Any other special requirement you need,like I beam type

Note
1. We only manufacture the high quality hoist
2. Different power supply available
3. OEM
4. Color variety

!! Best Quality and Best After-service.

Warranty Period: 2 Years

Zhong Tian, It's your best choice.

Any questions could contact me ,we will reply you within 24 hours.